|
Dick and Fellow Imperialists,
It is definitely an original part as the tube from
the top of the motor is flanged into the, I will call it a lower breather
filter, and this device, in disc form and free flow from the top down then
released through that same upper breather cap material on the filler tube in a
disc like form and it is filled with the same filament type straining
material as is the filler breather tune. In fact, after cleaning it up, I
would say I will in the future only have to undo the lower bracket which is
actually part of the lower breather filter as that is what is inserted
into the flanged tube running from the top. Finally an engineer was
allowing for servicing of the unit!! One bolt to remove
lower and simple pull-the-cap-off the filler on the top of the motor and clean
and I am done!
I also tried as best I could to identify the
lower piece through my FSM as well as the site and was unable to find
reference in factory form by word or picture.
Respectfully,
ybshore
|
Back to the Home of the Forward Look Network