Re: IML: Rear Bumper Removal 61
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: IML: Rear Bumper Removal 61
- From: Frank Griffin <gilbertparts@xxxxxxxxxxx>
- Date: Thu, 15 Mar 2007 05:29:51 -0700 (PDT)
I had the floor jack under the bumper just in case. The problem I had was finding access to two bolts. I finally found two plastic plugs in the trunk area and removed them, which gave easy access to the nuts with a 3/4" socket.
Frank
randalpark@xxxxxxx wrote:
If everything else has been removed first, the bumper will fall on your
feet when you take those out. BE CAREFUL!
Paul
-----Original Message-----
From: jcorey@xxxxxxxxxxx
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Wed, 14 Mar 2007 3:10 PM
Subject: Re: IML: Rear Bumper Removal 61
Yup. You have to go in through the holes in the rear body
cross-structure below the trunk lip and extract the two bolts there. I
recommend returning the frame-extension bolts at least aprtway, before
you pull these. The bumper is MIGHTY heavy.
jc
On Mar 14, 2007, at 5:35 PM, Frank Griffin wrote:
How do I get the rear bumper off my 61 ? I removed two frame
extension bolts and the two chromes carriage bolts on the bottom of the
bumper. I can't see what else is holding it on. Do I remove the two
nuts in the trunk ?
Frank
John Corey
jcorey@xxxxxxxxxx,jcorey@xxxxxxxxxxx
CFIC-Qdrive, 302 Tenth St., Troy, NY 12180 USA
518-272-3565
fax:
-272-3582
=
________________________________________________________________________
AOL now offers free email to everyone. Find out more about what's free
from AOL at AOL.com.
=0
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network