IML: 196o 1961 starter resources
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

IML: 196o 1961 starter resources



There are shops in most metro areas that rebuild
starters.  Look in the yellow pages under
automotive/electric.

Walk in with a case of beer and a smile and you may
get faster service.  Ask if they do work on the
premises, though when you call, especially if you have
more than one choice - you don't want a place that
ships it away.

Use a tool to mark your metal case to ID it, show them
the mark, and tell them that you want that one rebuilt
so that they are less likely to lose it.  Check for
the mark when you get it back - you'll know you have
the same unit that way.

 

Common's Auto Parts is where I get my stuff, and Mike
can find almost anything that is still available -
they've been in business since 1940 and he knows
Chrysler inside out.

commonsauto@xxxxxxxxxxxxx

If you contact him, please be prepared to place your
order and spend money so that you don't waste his time
- they're a busy place.


If he can't get it, you'll be rebuilding what you have
no matter what, as he's very well connected regarding
obscure Chrysler items.


You'd be money ahead to replace the starter relay and
battery cables at the same time so that the system is
completely redone and has no weak links to
sequentially fail on you.


-K


--- Mark Battesby <a1web@xxxxxxxxxxxxx> wrote:

> yesterday my car wouldn't start just clicked. I
> first did all the normal stuff checked wires
> connection etc. Lights did not dim when cranking the
> moter  or did the starter engage when I jumped it at
> the regulator. So i pulled the starter . The
> solenoid sits directly on top. As I took the cap off
> the end of the starter I noticed the wire going the
> post,that's connected to the solenoid was broken 
> Also this thick piece of copper was also broken I
> assume that that normally would be connected to the
> same area as the broken wire. So I hooked it back up
> that way but got nothing not even a click . So I
> wonder does that thick piece of copper is not
> suppose took connect there?  I tryed calling around
> to napa thinking that it wouldn't be hard to get a
> new starter and solenoid. But I was wrong nobody has
> one  where i live and they weren't even sure they
> could order me one. so my question is where can i
> get one fast cause its my only transportation right
> now ?


Kenyon Wills
 
 






















 
____________________________________________________________________________________
Be a PS3 game guru.
Get your game face on with the latest PS3 news and previews at Yahoo! Games.
http://videogames.yahoo.com/platform?platform=120121


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.