IML: C Body HP Manifolds "should" fit 1960
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

IML: C Body HP Manifolds "should" fit 1960



I held mine up to the engine compartment of the 1960
that I own and it certainly looks like they'll fit. 
The PS is an easy clear, and although closer, the DS
looks to fit,  wrapping around the steering box and
likely will be less snug than on my '72, so I stand by
my original assertion.

The manifolds that I installed on the '72 required the
engine to be lifted to install, so would expect the
same on other cars.

Presuming that the exhaust outlets are the same for
59-73+ RB heads, they should interchange.

The T shaped Dodge tow truck ones will fit on the DS,
but the passenger side is a rear-dump on my car, so
look carefully before you leap either way is the
bottom line.

Main point is that manifolds beat headers in most
departments, I think.  


Kenyon Wills
 
 






















 
____________________________________________________________________________________
Now that's room service!  Choose from over 150,000 hotels
in 45,000 destinations on Yahoo! Travel to find your fit.
http://farechase.yahoo.com/promo-generic-14795097


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.