IML: 1960 Starter Drags when Engine is At Operating Temp.

[randalpark@xxxxxxx]

That will also happen if the timing is too advanced. Try backing it off 
a little and see if the problem goes away. Heat shouldn't effect the 
starter that much.

Paul

-----Original Message-----
From: R.vdes@xxxxxxxxxxxxxxx
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Fri, 23 Mar 2007 2:50 AM
Subject: Re: IML: Wire  Wheels for my 60 imperial

OK James,
 
I understand, maybe the best thing I can do is to find me a reputable 
rebuilder and send him my original starter.
You see, mine is having problems when it is getting hot. The starter 
spins perfectly when the car is cold, but when the car is driven for a 
while and the engine has warmed up it turns around very slow.
If you wait for an hour or so the starter will act normal again :)
 
Robert
----- Original Message -----
From: James L BURTON
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Friday, March 23, 2007 11:36 AM
Subject: Re: IML: Wire Wheels for my 60 imperial


Hello, no I havent I think its not worth all of the opposition and the 
hassle to go with the little outcome  of the result. The  msd ingnition 
system has to be on its toes. To have the least effect against my 
oringinal starter. The header issue isnt worth the gamble when Im just 
going to use it for cruisins, and some kind of shows .My motor is 
allthat and im not going risk nothing because everything shiney and new 
will make you feel that way.
----- Original Message -----
From: Rob van der Es
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Friday, March 23, 2007 1:46 AM
Subject: Re: IML: Wire Wheels for my 60 imperial


Hi James,
 
Have you actually found another starter for your 60 already?
I am still looking around for the best option you see.
 
Thanks,
 
Robert
----- Original Message -----
From: James L BURTON
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Thursday, March 22, 2007 9:35 PM
Subject: IML: Wire Wheels for my 60 imperial


To  everybody  thank you for your support on helping me make a sound 
decision on the hi output starter, and header for my . There both out 
now Im looking for some wire wheels , Does anybody  know if a ford wire 
wheel will  fit the imperial ? If not can somebody help me ?
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.413 / Virus Database: 268.18.17/730 - Release Date: 
22-3-2007


No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.413 / Virus Database: 268.18.17/730 - Release Date: 
22-3-2007

________________________________________________________________________
AOL now offers free email to everyone.  Find out more about what's free 
from AOL at AOL.com.
=0


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm