Hi Tim,On the '60 thru '62 there are eight nuts under the car four on each side that need to be removed and I'm sure the '63 is the same. You will need a one half inch deep wall socket. Once those nuts are removed get some help to lift the seat assembly up and out. I say get some help because these seats are enormously heavy!
Good luck, Jim L. in OR----- Original Message ----- From: "Tim" <tpattrin@xxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx> Sent: Monday, April 30, 2007 11:33 AM Subject: IML: Removal of front seat
I have a '63 Imperial and I'm having new original interior put in. I need to take out the front seat. Has anyone done this and are there any tips I should know.-Tim ----------------- http://www.imperialclub.com -----------------This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for theAdministrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
----------------- http://www.imperialclub.com -----------------This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm