Re: IML: Changing gas tank sending units
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: Changing gas tank sending units



Got mine from Lowell Howe, but then found them at Home Depot.
Tom
----- Original Message ----- From: "Joe Strickland" <jwstrick426@xxxxxxxxxxxxxx>
To: "Imperial Mail List" <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Tuesday, June 19, 2007 5:34 PM
Subject: IML: Changing gas tank sending units


When I changed the gas tank sending unit on my '62, I did not drop the tank completely from the car. I unfastened the forward end and put a floor jack under it with a suitable board to protect the surface of the tank and lowered it enough to do the work. That avoided having to mess with the large "O"-ring. I too was afraid I would never find a replacement "O"-ring at the time. It is good to know that they are not difficult to find. What was the source for the replacement "O"-ring?

Joe S.


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.