Re: IML: shackles

["Michael Howlett" <collyman1@xxxxxxxxx>]

THANKS for the tip Ken,
That's too bad about Benz not wanting to do the work, they can make anything spring related there, maybe they've had a change in management or business practices.
I've had two Classic cars done with Benz spring, and for price and quality they used to be the best.
Also, while I think of it, I would stay away from Mac Radiator, they had a big change in management, and they've gone downhill fast, and just in case you knew him, Swede's Auto Parts on Glisan is now gone....... one of the last "old guys" for old parts.

-Mike (over here in Boring, out in the garage)

On 6/22/07, Ken Miller <kdmiller44@xxxxxxxxxxx > wrote:

Mike and all -

I took my 64 New Yorker to Oregon Spring at 920 SE Stark in Portland,
Oregon and they had everything I needed.  You might give them a try.

Ken Miller
61 and 67 Imperial Converts
64 New Yorker Salon

MIKE CINDY BECKER wrote:

> I took my 67 crown convertible to Benz springs in Portland oregon to
> see about some new leaf springs. they were glad to make some new
> springs, but said new shackles were not available from their
> supplier   and kind of didn't want to to the job because they were
> afraid of a shackle breaking. I am going to start looking for shackles
> anybody any ideas? thanks, mike becker



-----------------  http://www.imperialclub.com   -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm