|
Thanks everyone for the advice on the convert. top it works. I
need some advice on on adjusting the fuel tank sender, I put a new (fabricated
from brass by a guy in Detroit I think, several years ago, the gauge
always read empty, recently I removed the dash and went thru cleaned,
checked and repaired as needed. the gauge still read empty, but
as fuel was consumed the " check gages" light will come on showing that the
low fuel warning part of the circuit is working. but the gauge always reads
empty. today I removed the sending unit and bent the float rod "up", now with a
full tank it reads 1/4 tank on the gauge. Did I bend too far or not far
enough. BTW is not "gages" an incorrect spelling on the dash. thamks, Mike
Becker 67 imperial, in Salem, Oregon
|
Back to the Home of the Forward Look Network