Re: IML: '55 Imperial rear muffler clamps

Jan;

Thanks for your encouragement. My question can be further refined to ask whether the bracket fits the bumper supports near the pipes or on the frame. I could not find any holes in the frame or any of the bolts loosened from which I could have removed the bracket.

Roger near Phila., PA

'55 Newport

----- Original Message -----

From: Jan Harmonson

To: mailing-list@xxxxxxxxxxxxxxxx

Sent: Tuesday, September 25, 2007 11:20 AM

Subject: Re: IML: '55 Imperial rear muffler clamps

Hi

I have had mine apart several times in the past year or so while re-chroming. If you flip-flop the brackets several times you will see that there is only one way they will go, and it is not what you thought. If that doesn't work I can go look and answer specific questions.

Jan in Ojai, CA

1955 sedan

----- Original Message -----

From: Roger Casagrande

To: mailing-list@xxxxxxxxxxxxxxxx

Sent: Tuesday, September 25, 2007 7:24 AM

Subject: IML: '55 Imperial rear muffler clamps

I am in the process of putting my '55 Newport back together after being painted and having the chrome restored. In the disassembly process, I took a lot of photos to help in the reconstruction. One area I did not take was the removal of the bumpers. I thought it was obvious. The bumpers themselves are, however, the rear hangers for the muffler were removed and I cannot figure out where they are mounted. The parts manual and FSM don't get into that detail. I really need some help form you '55 owners.

Thanks in advance for your help.

Roger2382

No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.488 / Virus Database: 269.13.30/1027 - Release Date: 9/24/2007 11:27 AM