RE: IML: Valve cover gaskets and valve guide seals

[dave brown <imperial1usa@xxxxxxxxxxx>]

Mark,  I believe you need to remove the heater core housing to get the valve cover off as you described.  I know in my 66 LeBaron, I had to remove it when I did my valve cover gaskets 14 years ago.  I think the 413 and the 440 are the same size so it should duplicate on your repairs.
 
Getting cold in NJ
Dave Brown

---

To: mailing-list@xxxxxxxxxxxxxxxx
Subject: IML: Valve cover gaskets and valve guide seals
Date: Fri, 16 Nov 2007 13:24:19 -0500
From: mrs954@xxxxxxx


Hi Group,
I plan to replace the valve cover gaskets on my 64 LeBaron this weekend.  I have a small oil leak on one side so I thought I'd replace both gaskets.  I'm also contemplating replacing the valve stem seals while I have the valve covers off.  My question is, do I need to remove the heater core housing in order to remove the right side valve cover and valve springs? I could probably get the valve cover off, but I may not be able to get the spring compressor onto the valve springs on #8 cylinder. Any ideas or suggestions?

Thanks,
Mark Souders
Gettin' cold in Mohrsville, PA

---

Email and AIM finally together. You've gotta check out free AOL Mail!