Re: IML: sure grip ring and pinion new parts supply? Randy's DOESN'T

[sosmi@xxxxxxxxxxx]

Chris, to properly identify the ring&pinion, you need the 3rd member casting number. The last 3 numbers will be the ones to use, 741-742 or the latest489. Ring & pinions will not inter -change between different housings. 741-742 use shimmed pinions, 489 uses a crush (one time only)sleeve to set rolling torque on the pinion. Check the housing, since all three 3rd members will fit, and who knows what's been changed.Dave.

 

> -------------- Original message -------------- 
> From: "Chris Strohmeyer" <chrisstroh@xxxxxxxxxxx> 
>
> > Randy's Ring and Pinion is NOT a source for the Ring and Pinion on my 67. 
> > They suggested a junk yard! 
> > 
> > Chris Strohmeyer 
> > 67 Imperial Convertible 
> > 
> > 
> > ----------------- http://www.imperialclub.com ----------------- 
> > This message was sent to you by the Imperial Mailing List. Please 
> > reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
> > shared with everyone. Private messages (and attachments) for the 
> > Administrators should be sent to iml.webmonster@xxxxxxxxx 
> > To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm 
> >