Re: IML: Roof panel inserts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: Roof panel inserts



The drip lip trim retains that edge of the inserts.  The upper edge is caught under the roof spears, and the leading edge goes under the header trim over the windshield.  When I did my 61 4dr, I was concerned about abrasion and rust between the panels and the painted roof, so I first laminated the roof are under the panels with acrylic-adhesive polyester film.

jc

On Mar 11, 2008, at 8:08 AM, Rob van der Es wrote:

Hi Richard,
 
Thanks for hoppin' in on this subject?
I don't understand completely how the inserts are kept in place ..
I understand that one side (the one that goes under the roof trim ) secure its but is the opposite side slide under the roof rail or something?
Do you have any pictures left from your restore project that can be helpful to me (that is if I win the Ebay auction ofcourse :) ?
If so, feel free to mail them to me (offlist)
 
Thanks,
 
Robert
----- Original Message -----
Sent: Tuesday, March 11, 2008 12:56 PM
Subject: Re: IML: Roof panel inserts

The roof trim has a 90 degree flange around the top perimeter that has to go under the moulding.  The moulding is the same regardless. 
 
Richard
'60 Crown

Rob van der Es <r.vdes@xxxxxxxxxxxxxxx> wrote:
Is the same roof trim used then, or was a different type of roof trim used to hold the inserts down?
Will it also be possible  to glue the inserts in place (with epoxy glue maybe?) so that I won't have to disturb the headliner and roof trim?
Just a thought!
 
Rob
----- Original Message -----
From: John Corey
Sent: Monday, March 10, 2008 1:58 AM
Subject: Re: IML: Roof panel inserts

Oh yes, and if you don't you will later, when the water leaks in the mounting holes and ruins the headliner anyway!


On Mar 9, 2008, at 8:07 PM, PAUL WENTINK wrote:

I believe that you do need to remove the headliner in order to remove the roof trim that holds them down.

Paul W.


-----Original Message-----
From: Rob van der Es <R.vdes@xxxxxxxxxxxxxxx>
Sent: Sun, 9 Mar 2008 6:41 am
Subject: Re: IML: Roof panel inserts


@Paul: 
 
As you know, I own a 60 Crown 4 door HT. How difficult is it to fit these roof panel inserts? 
I really like them a lot, allthough they are already high on the dollar at Ebay... 
However, I don't want to tear down the headliner if that is necessary to fit those inserts. 
 
Do you have any idea how hard it is to mount these roof panels? 
 
----- Original Message ----- From: "PAUL WENTINK" <randalpark@xxxxxxx
Sent: Sunday, March 09, 2008 2:06 PM 
Subject: Re: IML: Roof panel inserts 
 
They are made to fit a four door. I believe that the request was for a 
Two Door, which requires longer panels. Also, these specific panels 
will only work on '60 & '61. They could be made to work on '62, but 
would require some skill, and the acquisition of a several more 
expensive trim pieces. 1963 had a completely different roof line and 
these will NOT fit that year. 
 
Paul W. 
 
-----Original Message----- 
From: Peter <starflite@xxxxxxxxxxxx
Sent: Sat, 8 Mar 2008 6:32 pm 
Subject: Re: IML: Roof panel inserts 
 
 
Hi: Someone on the list was looking for a pair of Stainless Steel 
roof panel inserts. There is a pair for sale on E-bay for the 1961-63 
Imperial. I'm not sure if those are the years he was looking for. 
 
They are item # 200206339211. 
 
 
Peter Bilecki 
 
1981 Imperial 
 
White/White Leather/ Mahogany Accent 
 
EFI 
 
----------------- http://www.imperialclub.com ----------------- 
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the 
Administrators should be sent to iml.webmonster@xxxxxxxxx 
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm 
 
 
----------------- http://www.imperialclub.com ----------------- 
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the 
Administrators should be sent to iml.webmonster@xxxxxxxxx 
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm 
 


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx


John Corey
CFIC-Qdrive, 302 Tenth St., Troy, NY 12180 USA
518-272-3565 x201
fax: -272-3582





Looking for last minute shopping deals? Find them fast with Yahoo! Search.

John Corey
CFIC-Qdrive, 302 Tenth St., Troy, NY 12180 USA
518-272-3565 x201
fax: -272-3582




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.