I'm willing to bet that the Heater Control Valve that you showed us a pic
of is not the correct one...but rather a universal replacement.
Possibly http://www.heatercontrolvalve.com can help you.
As far as those bundles of hoses,etc.,I'll bet they go to the Valve that
is supposed to be there.
I don't have a '72,but..My '75,which has the Autotemp II and has a bunch
of plastic vacuum tubes going to it. There is also something called the Cold
Engine Lockout Switch on the '75 Heater Control Valve. It prevents the
fan-motor from turning on and blowing cold air on you when the engine is not
hot enuff to supply hot water. The fan turns on and blows heat once the
engine reaches 140'F. It is over-ridden by the Defroster setting tho. The
'75 differs from the '72 tho,even tho they are both AutoTemp II's..like
Elijah mentioned.
Steve from Albany,N.Y. <--used to live in Apache Junction A.Z. in '90. Wish
I was there again for good.
'75 Imp 4dr <--with an operating Autotemp II
'79 440 powered 35 ft RV <--if I need more heat,I'll take the door off of
the microwave oven and turn it on!
_____________________________________________
----Original Message Follows----
From: 72.lebaron@xxxxxxxxxxxxxx
Reply-To: mailing-list@xxxxxxxxxxxxxxxx
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: IML: A/C parts help please!
Date: Sat, 13 Apr 2002 18:30:28 -0700
Hi all! Thanks for the many warm welcomes I've received so far.
As the weather here in Phoenix already pushes towards 100* it's become
pretty important for me to get the A/C working on my 1972 LeBaron.
The car is 99% complete, but the few parts that are missing, I have no idea
what to look for, and I don't have a service or shop manual for assistance.
Under the hood, attached to the passenger's side wheel well is a heater
valve. The valve looks exactly like this:
http://www.checkerauto.com/product_images/AAP/FAA/74643.jpg
There's also a bundle of wires and small rubber hoses (vacuum lines?) that
have been neatly taped together an capped off with a plastic bag. The wires
and hoses run along the wheel well and into the firewall.
My best guess is that these wires and hoses connect to some kind of
controller that's supposed to be attached to the heater flow valve? But
since it was missing when I bought the car I have no idea what to look for.
Any assistance as to what the missing part is called or where I can get
one? Partsamerica.com lists something called a A/C Heater Control Switch:
http://www.checkerauto.com/product_images/AAP/GPS/HS29.jpg
Is THIS the part I need? Does this somehow connect to the heater valve? It
appears to have connectors for wires and vacuum hoses. Please help before I
swelter away while trying to enjoy my new Imperial! :^)
Thanks in advance,
DD
_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com