HELP! I overheated/Is it done?

[Bob Harris <b1werks2@xxxxxxxxxx>]

Thad -

    I hate to jump in the middle, but I remember reading something of your
problem with an oil filter mounting leak. If this is one of those where the
filter is attached to a 90 degree adapter which is mounted onto the block,
there is a gasket between the adapter and the block, it is Chrysler PN
3577674. Hope this helps..................Bob Harris
----- Original Message -----
From: "Thad" <gentrysgarage@xxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Wednesday, August 21, 2002 9:56 AM
Subject: Re: IML: HELP! I overheated/Is it done?


>
> --- Dick Benjamin <DickB@xxxxxxxxx> wrote:
>
> > The oil filter adapter gasket is probably not
> > available separately, you may
> > have to either buy a complete set for the engine, or
> > make one yourself out
> > of sheet gasket material.  This is most likely just
> > a heavy paper type
> > gasket, not rubberized cork or anything thick, but
> > copy the original as
> > closely as you can.
> >
> > Dick,
>   Right on both counts! It is a heavy paper gasket at
> least on the 60's smallblocks. I have never seen it
> listed seperately, but I have to say I never checked
> Mother Mopar!
>
>   Thad the ImpPoster
>   1965 Imp the Grey Ghost
>   LaLa Land Cali
>
> __________________________________________________
> Do You Yahoo!?
> HotJobs - Search Thousands of New Jobs
> http://www.hotjobs.com
>
>