Choke pull off for 66

[Jim Carpenter <Jim@xxxxxxxxxxxxxxxxxxxxxxxx>]

Let us know if you have trouble getting one and we can do our best to 
help.  The original Chrysler part number would be helpful.
Jim

Chris Hawkins wrote:

>Carb# for a '66 Imperial is Carter AFB 4131-S.  My
>experience is that the correct pull-off is not easily
>located, but who knows, you might get lucky.  
>
>If not, the same one was used on 413's and 440's from
>the mid-60's, so good used ones should be possible to
>find.
>
>Chris H.
>
>60 NY T&C
>66 Crown Convertible
>66 Lebaron
>
>
>--- Elijah Scott <imperial1971@xxxxxxxxx> wrote:
>  
>
>>--- Matt Hopkins <mhoppy@xxxxxxxxxxx> wrote:
>>    
>>
>>>I took my 66 to my mechanic because carbs are not
>>>      
>>>
>>in
>>    
>>
>>>my book of knowledge.
>>>He said the choke pull off is misssing.  
>>>      
>>>
>>Matt,
>>
>>A good option is to note the model number of your
>>carb
>>('m guessing it's a Carter AFB, but you'll need the
>>actual number that's stamped on it) and take that to
>>a
>>NAPA store.  They should be able to locate the
>>correct
>>pull-off.  The last time I bought one it was about
>>$15, so it's not terribly painful.  And there are
>>only
>>two screws to replace it.
>>
>>Good luck!
>>
>>Elijah
>>PS--Thanks for the AutoTemp tip
>>1965 Imperial LeBaron
>>1970 Imperial LeBaron
>>(3) 1971 Imperial LeBarons
>>
>>__________________________________________________
>>Do you Yahoo!?
>>Yahoo! Web Hosting - establish your business online
>>http://webhosting.yahoo.com
>>
>>