|
Hi all ,
I hope that some one out there can help on this.
When replacing old wires ,the diagram shows what gauge & color. However are
modern / new rolls of wire still gauged the same way. I need to replace a few
wires that run from the ignition switch to starter relay, the originals are
cracking & perishing quite bad. ( probably due to heat off the engine.)some
of the wires seem to have quite a thick insulation. But modern wiring seems
to be thinner even if the amperage rating is the same. I am no auto electrician
but still capable of doing small jobs like this, just the Tech side is letting
me down. For those that are familiar with the 60/61 Imps I will probably need to
replace Gen. to reg./ reg to ammeter/ light switch.
Thanks for your time,
Dave 60 Le Baron
England.
|
Back to the Home of the Forward Look Network