Y pipes again

[Daniel M Wing <imp1983@xxxxxxxx>]

Well,

I used a block of wood and my sledge hammer and the y-pipe
popped loose with a couple of medium raps.

I will not be able to get it off until I remove the starter AND there is
still some
tack weld holding it.  And it's wedged pretty hard into the converter
pipe.  I will try to
grind the rest of those welds off (Grrrrrrr!  What  a pain.)  Any Ideas
on how to break
it loose from the converter pipe once the weld is cleared?  (I was
thinking
of a pipe wrench holding the converter pipe still while I yanked and
twisted on the y-pipe.)


Dan Wing
Marcy, NY  USA

imp1983@xxxxxxxx

________________________________________________________________
The best thing to hit the internet in years - Juno SpeedBand!
Surf the web up to FIVE TIMES FASTER!
Only $14.95/ month - visit www.juno.com to sign up today!