The side panels to the rear seats are screwed on and the " sail panels" are
held in with door type clips as is or should be the covered panel around the
rear window E me if this is not clear.
David Munson
>From: "BIGDOG1\(PHIL JR\)" <BIGDOG1@xxxxxxxxxxxxxxxx>
>Reply-To: mailing-list@xxxxxxxxxxxxxxxx
>To: <mailing-list@xxxxxxxxxxxxxxxx>
>Subject: Re: IML: 66 Crown Coupe rear windows
>Date: Mon, 16 Jun 2003 15:47:20 -0400
>
>you must pull the top portion of the seat as well.
>
>
>
>----- Original Message -----
>From: <LOYALZ@xxxxxxxxxxx>
>To: <mailing-list@xxxxxxxxxxxxxxxx>
>Sent: Monday, June 16, 2003 2:58 PM
>Subject: IML: 66 Crown Coupe rear windows
>
>
> > I was checking the site & was unable to find info on
> > removing the rear quarter panels in a 66 Crown
> > Coupe to access the window mechanisms. I have
> > removed the rear seat bottom & the few screws I
> > could see, but its still attached. Are these panels
> > put on with clips, like those found on the door
> > panels? I didn't want to pull on them & break them.
> > Any help would be appreciated.
> >
> > Thank You,
> >
> > Loyal Stern
> > '66 Crown Coupe
> >
> >
> >
Back to the Home of the Forward Look Network