The dash can be removed as a unit once the windshield is removed. There are
a row of screws just inside the glass, and there are some side supports
behind the upholstery on each side. Then there are some braces and the like
at the steering column. If you remove the seats first so you can lay on
your back and look up under the dash with a good light, you will see all
these fasteners.
The whole dash assembly is quite heavy - you'll need help with it. Things
will go much easier if you remove the steering column first - that is the
way I did it.
Dick Benjamin
----- Original Message -----
From: "Carmak" <carmak@xxxxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Monday, January 26, 2004 9:03 PM
Subject: IML: 1967 Imperial dash assembly removal
> I have found a 67 Imperial that I will have one day to strip. I would
> like to remove the entire dash assembly as a unit. Is this possible? I
will
> also be removing the windshield and the steering column. Thanks.
>
> Craig
> Riverside, IA
>
>
>
Back to the Home of the Forward Look Network