auto bodywork...RUST

["Kenneth Napper" <I440toyou@xxxxxxx>]

clean the metal as best you can;use a grinder,wire wheel,then etch prime,weld patch,grind smooth,etch prime,fill if nessary(metal to metal or equal product:can find and have sent to your home or bisness by Eastwood company phone number:1-800-345-1178)sand,etch prime poli-ester prime,sand seal(2 sealer coats of non-sanding epoxi-primer,paint-clear.

----- Original Message -----

From: Jan Harmonson

To: mailing-list@xxxxxxxxxxxxxxxx

Sent: Monday, February 16, 2004 10:58 AM

Subject: Re: IML: auto bodywork...RUST

Hi

I have seen reference to "killing rust" several times. If sanding clear to
bare, clean metal is not reasonable what can be best  used to kill the
rust?

Jan
----- Original Message -----
From: "Kerry Pinkerton" <Pinkertonk@xxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Monday, February 16, 2004 10:00 AM
Subject: Re: IML: auto bodywork...RUST


> bom tie wrote:
>
> >I wanted to see if anyone has a comment about this process...
> >http://www.rustbusters.com/
> >
> >Looks way cool, big time saver and all metal
> >
> >
> >
> It will replace the metal for you to lay in bondo but it won't kill any
> rust.  That is the fallacy.  If you want to have a good replacement, you
> MUST kill or remove all rust.  If you just replace metal where the
> cancer is, it will simply rust out around the new metal.
>
>
>
> -----------------  http://www.imperialclub.com  -----------------
> This message was sent to you by the Imperial Mailing List. Please
> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
> shared with everyone. Private messages (and attachments) for the
> Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>
>
>
>
>






-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm