1960 Stuck engine update
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

1960 Stuck engine update



That’s to good to be true!You know what they say:if it to good to be true,it really to good to be true.$500.00,is magnafluxing. It needs that!
----- Original Message -----
From: Tim Hulse
Sent: Sunday, February 29, 2004 10:30 PM
Subject: RE: IML: 1960 Stuck engine update

Thanks for the info. I guess my best bet is to stick things back together and have in hauled to a engine rebuilder. I talked to a man here in Bkfd Ca who said he would pull it, do all the machining that was needing and put her back together for me for $500.00 bucks. I would have to supply parts of course. Does that sound reasonable?
 
Thanks
Tim
-----Original Message-----
From: mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx]On Behalf Of B&T Roddick
Sent: Sunday, February 29, 2004 7:11 PM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: 1960 Stuck engine update

Tim,
You can get cylinder sleeves for just about any engine.  Just contact an engine machine shop.
 
 
 
 
 
----- Original Message -----
From: Tim Hulse
Sent: Sunday, February 29, 2004 7:11 PM
Subject: IML: 1960 Stuck engine update

Ok,
 The number 6 cylinder has a crack in the piston Sleeve. There was a lot of rust in number 6. A lot of rust. So I guess its going to have to come out. Do they sell piston sleeves anywhere or am I really out of luck?
 
Thanks
Tim



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.