Yes it can. There may be an extra crossmember for the rear of the torsion bars that may make things a bit difficult. I know the 65s did. But, - a few years later, - all the Chrysler cars had much the same setup, we just learned to work around it. Regards, DaveG. ----- Original Message ----- From: "mike and cindy" <mbecker30@xxxxxxxxxxx> To: <mailing-list@xxxxxxxxxxxxxxxx> Sent: Tuesday, October 05, 2004 1:55 AM Subject: IML: 67 imp transmission hi list , does anybody know it the transmission can be removed from a 67 imp. whithout removing the engine, thanks mike becker ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm