Re: IML: 57-63 Window Motors

["jsadowski" <jsadowski@xxxxxxx>]

I've never found any new ones. They are the same part for many years & you can usually get some used ones in good condition. When you get into the doors, it will be very easy to tell if these are bad or not. They either will not turn at all, or one side will be worn flat.

     My advice when you try to remove them is use a wrench from the back side. If you try loosening the mounting bolt, you will almost certainly strip out the head. Break it free from behind will allow them to be easily removed.

John

----- Original Message -----

From: Chad Smith

To: mailing-list@xxxxxxxxxxxxxxxx

Sent: Wednesday, November 17, 2004 11:59 AM

Subject: Re: IML: 57-63 Window Motors

John and list:

 

Nylon rollers?  Is this a part that we can source somewhere, or does George Laurie make this part? 

 

Thanks,

 

Teresa Smith

----- Original Message -----

From: jsadowski

To: mailing-list@xxxxxxxxxxxxxxxx

Sent: Tuesday, November 16, 2004 9:09 PM

Subject: Re: IML: 57-63 Window Motors

One other common problem with the windows is that the nylon rollers may also be stuck, or have been stuck for some time & have developed a flat spot . This would require that they be replaced or the window will still bind, no matter how clean the track are.

John

----- Original Message -----

From: Kenyon Wills

To: mailing-list@xxxxxxxxxxxxxxxx

Sent: Monday, November 15, 2004 11:21 PM

Subject: Re: IML: 57-63 Window Motors