Re: [FWDLK] Power Window Small Parts Needed

[Ron Waters <ronbo97@xxxxxxxxxxx>]

Thanks John, but I want my car to be factory correct.

 

Ron

----- Original Message -----

From: Bjwt56@xxxxxxx

To: L-FORWARDLOOK@xxxxxxxxxxxxx

Sent: Tuesday, May 05, 2009 12:27 PM

Subject: [FWDLK] Fwd: [FWDLK] Power Window Small Parts Needed

Ron:

     On my 56, I have assembled all parts for the power windows without much of a clue as to how the rubber conduits were to be installed in the front doors.  Therefore, I drilled my own 1-1/2 inch holes in the post and door for the rubber channels that I got from Gary Goers.  One end of the channel is fabricated to fit the hole and the other end I decided to use a rubber grommet.  I plan to use rubber cement to attach the grommet and the channel.  Maybe not the same as what you are looking for, but it should work.

     John 


**************
A Good Credit Score is 700 or Above. See yours in just 2 easy steps! (http://pr.atwola.com/promoclk/100126575x1221322931x1201367171/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072&hmpgID=115&bcd=May5509AvgfooterNO115)

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1