Re: [FWDLK] Anybody parting out a 55 or a 56 Windsor, or a 56 Dodge w/the 270 Poly engine?

[Gary Pavlovich <glpavlovich@xxxxxxx>]

Neil,

The '56 distributor is from the 277 Poly 2bbl. engine.  I am not 100% 
certain of the crossover as the 270 Poly is a Dodge engine; I would suggest 
querying the FLL.

Gary
----- Original Message ----- 
From: "Eastern Sierra Adjustment Svc" <esierraadj@xxxxxxxxxxx>
To: "Gary Pavlovich" <glpavlovich@xxxxxxx>
Sent: Wednesday, October 27, 2010 2:03 PM
Subject: Re: [FWDLK] Anybody parting out a 55 or a 56 Windsor, or a 56 Dodge 
w/the 270 Poly engine?


> Gary, that 56 Savoy 301 V/8 dissie should work, huh?
>
> Does/did it come off of a 4-bbl engine?
>
>
> Gary Pavlovich wrote:
> > Neil,
> >
> > I have a single point distributor from my '56 Ply Savoy w/277 V-8 that is 
> > in good running condition (no cap) and comes with a NOS breaker plate 
> > assembly mechanism (entire top plate/points/condensor/wiring...)  if you 
> > choose to rebuild it.  Let me know if you are interested; $40 plus shpg. 
> > to you.
> >
> > Thank you,
> > Gary Pavlovich
> > CA
> > ----- Original Message ----- From: "Eastern Sierra Adjustment Svc" 
> > <esierraadj@xxxxxxxxxxx>
> > To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
> > Sent: Wednesday, October 27, 2010 12:32 PM
> > Subject: [FWDLK] Anybody parting out a 55 or a 56 Windsor, or a 56 Dodge 
> > w/the 270 Poly engine?
> >
> >
> > > Looking for a rebuildable distributor from one of them.
> > >
> > > Neil Vedder
> > >
> > > *************************************************************
> > >
> > > To unsubscribe or set your subscription options, please go to
> > > http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1