Re: [FWDLK] PISTONS FOR A 350

[Gary Pavlovich <glpavlovich@xxxxxxx>]

ED,

Adam is correct in that you will need a custom piston if your other vendors 
cannot supply the smaller overbore you need.  I have used ROSS for most of 
my custom Poly pistons as well as Venolia.

Keep us posted on what transpires.

Gary Pavlovich

-----Original Message----- 
From: eddee@xxxxxxxxxxxxx
Sent: Tuesday, July 12, 2011 9:07 AM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] PISTONS FOR A 350

Hello Group

Does anyone have or specifically know of any one who has or can make
+030 pistons for a 1958 350 PLYMOUTH.
Even +20 or +40 would be fine.

I CAN GET +060s,,,,,,,,,,,,,,,,,,,but the bore is surprisingly clean and
only needs +020 over.

I have checked with EGGE and OLD TIME PARTS with no success
THANK YOU
ED ECKERSON
LI  NY

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1