Hi Rich
I did a bit more research--You are correct on the 58 COMMANDO
All head casting possibilities were 1.94/1.60 valve sizes
Still some confusion on the 59 COMMANDO
I was told by someone well in the know,, there were about 6 casting
numbers that could be put on the 59 361 engine.
All were 1.94/1.60 configuration---EXCEPT for one
Casting 1851509 had 2.08 intakes
He was not certain whether these heads were confined to the 413 in the
300E or also went on the GOLDEN COMMANDO
ED
l
On Tue, Mar 26, 2019 at 11:38 AM, Richard Whelan wrote:
1958-350 CI were 1.95 and 1.60 per the service manual. Looks like the
361 got a little bigger valves.
-----Original Message----- From: eddee@xxxxxxxxxxxxx
Sent: Tuesday, March 26, 2019 11:23 AM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] 1959 361 motor head question
Hello All
Just happened to notice in the 1959 PLYMOUTH SERVICE MANUAL SUPPLIMENT
that on page 33 it states that the 361 cylinder heads came with 2.08
intake valves and 1.74 exhaust valves.
IS THAT CORRECT????
I was under the impression that the sizes in those days were 1.94/1.6
RSVP
ED ECKERSON
*************************************************************
To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
Help the Forward Look with every eBay purchase by starting your search
here:
http://www.ForwardLook.net/eBay
Help the Forward Look with every Amazon purchase by clicking here:
http://www.ForwardLook.net/Amazon
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
*************************************************************
To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
Help the Forward Look with every eBay purchase by starting your search here:
http://www.ForwardLook.net/eBay
Help the Forward Look with every Amazon purchase by clicking here:
http://www.ForwardLook.net/Amazon
|