I once replaced my M cylinder with another of the same configuration but not
same mopar number. had the same problem- NO brakes.
Bottom line- as was suggested by bruce- volume of M cyl was not appropriate to
move the fluid in the wheel cylinders.
I would guess this would be esp true if one had a M cyl that was of a large
enough vol to move a total of 4 front and 2 rear wheel cyls and replaced it
with a M cyl that was designed to work with only 2 front and 2 rear cyls.
Believe power brakes is also an issue.
If U R removing it maybe a little Pi R Squared times stroke could allow U to
verify if the volume is a problem!
Good Luck.
L.
|
Back to the Home of the Forward Look Network