Re: [FWDLK] 60 Windsor

["Brendan Sheehy" <desoto@xxxxxxx>]

Thanks for the info.  I put front discs on my 48 Dodge and will never drive a 4 drum car again! I am running 15" wheels. BAre there Cordobas with different size ball joints that I should be aware of? Do the tie rods have to be shortened by adjusting them normally or altering them?
Thanks.
It nice to find out others have interest in these type of cars!

----------
From:   Gerry Steinberg
Sent:   Friday, May 01, 1998 10:21 PM
To:     L-FORWARDLOOK@xxxxxxxxxxxxx
Subject:        Re: [FWDLK] 60 Windsor

Hi Brendan;
I'm doing a 61 Windsor wagon with front disc brakes from a
76-78 Cordoba that uses the same size ball joints.  I'm using
15 inch wheels.  If you are using 14 inch wheels look for Aspen or
Volares with discs.  You will need the master cylinder and
porportioning valve from the donor car.  Tie rod ends will have to
be shortened 1/4 to 1/2 inch(??) to get good alignment.  Did it to my
60 300F about 2 years ago.  Should have done it 10 years ago.
The only way to go.  Gerry Steinberg   MOMO8@xxxxxxxx
Also putting in a 440 with 62 aluminum torqueflite using all the cables.

On Fri, 1 May 1998 21:29:50 -0500 Brendan Sheehy <desoto@xxxxxxx> writes:
>I own a 60 Windsor 2 dr hdtp as a substitute for the 60 DeSoto
>Adventurer that I
> really want.  I live in the Chicago area.
>
>Does anyone know if there is a later model (70's) Mopar front
>disk/spindle setup
> that will bolt up to the Windsor?
>Thanks.
>
>Brendan
>

_____________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]