[FWDLK] Re [FWDLK] petronix on 55

["John Compton" <desotojohn@xxxxxxxxxxx>]

I gve up!  What is a Petronix distributer?

John Compton


----- Original Message -----
From: "Terry & Andree Hoeman" <tehoema@xxxxxxxxxxxxxx>
To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Monday, April 17, 2000 10:18 AM
Subject: [FWDLK] petronix on 55


> I'm at least one 55 guy who bought the kit and installed it.  Only problem
> to watch for is the dang screw holding it down is too long.  Shorten it or
> get a shorter one and it drops right into place----on my dual point setup
at
> least.
>
> John will treat you right!
>
>
> ----- Original Message -----
> From: Family Brandwijk <fambrwyk@xxxxxxxxxxxx>
> To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
> Sent: Monday, April 17, 2000 11:40 AM
> Subject: [FWDLK] FW: temporary fForwardlook mailstop
>
>
> > -----Oorspronkelijk bericht-----
> > Van: Family Brandwijk [mailto:fambrwyk@xxxxxxxxxxxx]
> > Verzonden: maandag 17 april 2000 10:38
> > Aan: L-FORWARDLOOK@xxxxxxxxxxxxx]
> > Onderwerp: Radio ,electronic ignition pertronics 6 Volt positiv ground
and
> > temporary Forwardlook mailstop.
> >
> >
> > Abouth my Radio.
> >
> > I want to thank all the persons who adviced me in a possible convertment
> of
> > my radio into fm,I told you radio was repaired a few years ago,and I
found
> > out there was a bulb wich was not working anymore,replaced it and it
works
> > fine,so mr. Seckman's Antique Radio and Speaker Repair did his work
fine,I
> > will prospone the FM convertion.
> >
> > Abouth the electronic ignition,
> >
> > I emailed and spoke with Mr.John Lazenby he said he had delivered the
> > pertronix system before to a Chrysler 1955 owner and since we own a
> Plymouth
> > 1955 ,is is not sure if it will work because of other distributor
nr.This
> is
> > what he wrote to me:
> > -----Oorspronkelijk bericht-----
> > Van: John Lazenby [mailto:john@xxxxxxxxx]
> > Verzonden: vrijdag 14 april 2000 15:55
> > Aan: Family Brandwijk
> > Onderwerp: Re: 6 Volt positiv Pertronix electronic ignition.
> >
> >
> > Hi Dirk,
> >
> > I did check in my parts books last night and it looks like the same
> breaker
> > plate  and rotor is used in your distributor as well as the Chrysler
unit.
> > This would lead me to think that the Pertronix unit I offer will work.
> >
> > If you give me the OK I'll send one to your Florida address.  If for
some
> > reason it does not work you can return it and I will refund the purchase
> > price.
> >
> > Let me know what you wish to do.
> >
> > John
> >
> > so I ordered it and when I come back I will let you know if it works.
> >
> >
> >
> > A question for Dave,the webmaster:
> > Dave,will be going away untill the 9th of may,would like to be removed
> from
> > the maillist for now,will request new entry when I am back,when
neccesary.
> > also remove my office email dbrandwijk@xxxxxxxxxxxxx for always also
> > in the members list,and replace for email fambrwyk@xxxxxxxxxxxxx
> >
> > leaves me to wish everybody a happy easter and maby will be seeing some
of
> > you in Carlisle,thanks and greetings ,Dirk and family.
> >
>