[FWDLK] Fwd: [FWDLK] 318 poly block

["Dan Kershner .Have 1961 Dodge Phoenix convrt." <MOPARMOUNTAIN@xxxxxxx>]

--- Begin Message ---

• From: "Dave Grove" <groveautomotive@xxxxxx>
• Date: Sun, 30 Apr 2000 17:02:16 -0400

Dan - to the best of my knowledge, ALL small-blocks have the same
bellhousing bolt pattern.  However - you cannot use a 65 block in a 61 car -
all blocks 61 & down are different in the crankshaft-torque converter
mounting setup.  Are you sure the 65 block is a 318?
DaveG.
----- Original Message -----
From: Dan Kershner .Have 1961 Dodge Phoenix convrt. <MOPARMOUNTAIN@xxxxxxx>
To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Sunday, April 30, 2000 3:47 PM
Subject: Re: [FWDLK] 318 poly block


> Hello again, I just came in from trying to connect the bellhousing from my
61
> Dodge 318 poly to the 1965 Dodge 318 poly block I recently purchased and
it
> will not work. The bolt pattern is slightly different and the 1/2 inch
> locating studs are in different locations------ Now I'm really
> confused------!!   Any input??

--- End Message ---