Hi everyone, Still receiving valuable information on getting Jason's car up and running from many of you. Thanks for all you help and support. A list member has a 1955 261 v8 in rebuilt riunning condition. Will it fit easily into our 1956? Will the powerflight with push-button in our 56 fit and replace the powerflight with lever control from the 55?? I worked on the "second" engine this weekend. It is turning over very readily but, alas, tried to fill it with water and it all went out on the ground. Two freeze plugs on the right side missing. Didn't check the left side. Don't know when they popped - before I got it two years ago or since it has been sitting here in Chicago. The guy I bought it from in Texas said he kept antifreeze in it because it got down to 20 degrees. The two years it sat here, it got down to well below zero. No sign of the freeze plugs on the ground though. I stuck my finger into the hole from the freeze plus and it's really grungy in there. Loose grime and rust. In any case, before I can do anything else, I need to get freeze plugs replaced then see if she'll hold water or if the block is cracked. I'm out of town the next two weekeds so it will be a couple more weeks before I can get a chance to try to replace the freeze plugs. Any other suggestions??? Joe and Jason 56 Belvedere(s) (still hoping) __________________________________________________ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail - only $35 a year! http://personal.mail.yahoo.com/ |