If it had cooler line fittings, I'd plumb in a cooler somehow. A lot
cheaper than rebuilding the transmission after it overheats.
my .02 worth,
Mike
At 03:49 PM 7/28/02 -0400, Stragand, Dave wrote:
Hi
All,
I figured out where my trans is leaking.
I had installed a temporary rubber hose between the cooler line input and
output, and the kickdown bar had rubbed through the hose causing it to
leak rather badly.
The transmission originally had been equipped
for coolant lines, so I did not want to plug them. My question is,
though, could I just install the plugs from my old trans, or does it need
to have the fluid flow? Or are there internal differences between
an air-cooled trans and those with coolant lines?
-Dave
|
|
Back to the Home of the Forward Look Network