[FWDLK] Long-necked Vibrators

[eastern sierra Adj Services <esierraadj@xxxxxxxxx>]

Charles/List , contemporary review mentioned the vibrating mirrors, and
there was even a Technical Service Bulletin (#D-27; 12/18/56)
issued, which instructed on how the long-necked mirror shaft can be
shortened by  1 1/2" , and the TSB starts out thusly : " To help
eliminate possible rear view mirror vibration, the shaft which attaches
the mirror to the bracket  can be shortened 1-1/2" ....."

btw, Gary Goers (@ least, used-to-) sell a wrench that mates to the
mirror- base's 'notches', and can tighten the grip on the mirror, and
eliminate some/most of the high-speed
loco-motion of the mirror-face.

btw(ii), the TSB's also discuss noise and/or vibrations in the
speedo-assembly, fuel pump, rear shock absorber "mounting-noise" and
even in the radio"vibrator noise @ low speeds". Nothing, however, was
"said" about problems with driveline imbalances.

Neil

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Over 25,000 pages of archived Forward Look information can be easily searched at
http://www.forwardlook.net/search.htm  Powered by Google!