Re: [FWDLK] door handle removal tool

[Dave Stragand <dave.stragand@xxxxxxxxxxxxxxx>]

Bend 1/4" of the tip of an old butterknife up at a 90 degree angle -- that's
pretty much all you'll need. Just find the springy side of the tab and push
it in with the bent part of the knife while wiggling the handle.

-Dave

-----Original Message-----
From: Forward Look Mopar Discussion List
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of Bryan Scott
Sent: Sunday, January 09, 2005 7:56 PM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] door handle removal tool


Hi all!

I'm wondering if anyone has a part number/manufacturer for a door handle
removal tool that works on their 57 or 58 DeSoto?  I bought one that looked
like it would do the trick, but noooooooooo!

Thanks for your help!  Also, if you have any helpful tricks to do the job
(that might not be obvious or common knowledge) please pass them on!

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1