Re: [FWDLK] 413 A/C Idler Pulley Replacement

[Tony Rinaldi <awrdoc@xxxxxxxxx>]

Hi Gang,

Before anyone else comes across another mentally challenged Parts Counter
Person who says that the ³nut² is 1 number short tell them to add a zero, as
in 0, before the number as follows:

#0271502 Nut Hex

Thanks to all,
Tony




> From: Tony Rinaldi <awrdoc@xxxxxxxxx>
> Reply-To: Tony Rinaldi <awrdoc@xxxxxxxxx>
> Date: Tue, 1 Mar 2005 20:43:55 -0500
> To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
> Subject: [FWDLK] 413 A/C Idler Pulley Replacement
>
> Hi to all,
>
> After much personal expense in time and money, the makings of a modern
> replacement for our idler pulleys are all readily available from your local
> Mopar dealer. This will fit all '59-'65 Chrysler & Imperials and other cars
> with 413 A/C set ups.
>
> #3830196 Pulley ID
> #9418275 Bolt Hex   (Comes with attached washer for outside of pulley)
> #271502   Nut Hex
> #5214065 Shield ID  (Need 2 of these)
> You will also need 1 or more 7/16 washers between inner shield and the
> support depending on your alignment and an optional lock washer behind the
> support and in front of the nut if you are the belt and suspender type.
>
> The compression bolt & nut is hardened.
> The bearing is sealed on both sides and made in Canada.
> The pulley is made in USA.
> Do not use the screw hex that is called for with the pulley. The bolt hex
> called for above is more substantial and comes from another assembly that
> uses the same bearing.
> Do not order an after market pulley that replaces this Chrysler number
> because it will only fit a 3/8 in. belt. Our belts are 7/16 in. and this
> pulley accepts the 7/16 in. belt completely.
>
> You will have to flatten one side of the bolt, where it passes thru the
> support, so that it measures no less than .377 in. across the flat to the
> other side of the threads if your support still has the flat at 12 o'clock
> high. Use the existing bolt as a guide. The tighter the fit the better. If
> your support has already been drilled out round then this will not be
> necessary.
>
> Retail list is $44.40 complete.
> I paid $29.27 thru my Chrysler mechanic friend.
>
> E-mail me privately with a request for photos.
>
> awrdoc@xxxxxxxxx
>
> Respectfully submitted,
> Tony Rinaldi
> 300-F Conv't
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1