[FWDLK] reply to: Keys?

["John J. Hertog" <crossram@xxxxxxxxxxxxx>]

Hi Bob,

 

The odds of finding a key that will work in your existing locks are not great. There are too many permutations. However, here's another approach:  remove the cylinder from one door. Take it to a locksmith, together with an appropriate key blank. The locksmith should be able to take that cylinder apart, and, based on the pins, make a key that will fit it - (and thus will also fit the ignition lock).   You can also remove the lovebox lock and use that to have him make you a key that will fit it - and the trunk lock.   All you will need to get, for the locksmith,  is correct key blanks for that year car, which can usually be found on eBay.

 

John Hertog

Sag Harbor NY

 

 

 

 

 

----- Original Message -----

From: Bob Moore

To: L-FORWARDLOOK@xxxxxxxxxxxxx

Sent: Wednesday, April 06, 2005 5:20 PM

Subject: [FWDLK] Keys?

Hi,

I'm getting a little tired of working on my '58 Dodge Sierra with it 'hot wired'/toggle switch under the hood, and it is about time to try and find some keys to fit it! 

Does anyone have a large selection of 'forward look keys' that they would be willing to 'loan' for a day or two so I can try and find one that works?

Thx!

Bob

---- Msg sent via CWNet - http://www.cwnet.com/

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1