Re: [FWDLK] Dueling intakes

[Paul Holmgren <paulholm@xxxxxxxxxxxxx>]

David Homstad wrote:

> Jim,
>
> The 57 Dodge 2x4 intake is the Offenhauser. There is no Mopar or Offy number
> on it. There may have been a Mopar number in the system so they could order
> replacements, but I don't know.
>
> Offy still makes the same 315/325 Dodge Hemi/Poly 2x4 intake, for about
> $250.
>
> Dave Homstad
> 56 Dodge D500
>
> -----Original Message-----
> From: Forward Look Mopar Discussion List
> To: L-FORWARDLOOK@xxxxxxxxxxxxx
> Subject: Re: [FWDLK] Dueling intakes
>
> Now that you've mention it: the part# for a '57 Dodge dual intake
> isn't listed either.
> Maybe there isn't a Mopar dual intake? Just the Offenhauser?
> But if there is a Mopar dual intake for '57 Dodge, does anyone of you
> know what the part# is? Or even better: does anyone of you know where
> I can 'get' me one?
>
> Jim Hoekendijk.
>
> ----- Oorspronkelijk bericht -----
> Van: eastern sierra Adj Services <esierraadj@xxxxxxxxx>
> Onderwerp: [FWDLK] Dueling intakes
>
>
> > A friend asked me, tonite, to riddle-you-this:
> >
> > He's got two dual-4-bbl intake manifolds; both DCPD, and cast
> > iron. One is #1822004, and # 1634285.
> >
> > I checked my 55 -58 parts manual, & neither P/N is listed.
> >
> > The "16" originated in 1956, & the"18" originated in 1958.
> >
> > Does anyone  know the "application" of either/both intake(s)?
> >
> > My friend has a 1963 Canadian "Polara 440"
> > convertible, with a 313 Poly motor.
> >
> > He's really interested to find out if the "18" intake might fit a
> > (his)Poly engine, or, is it  'just' for a "B" block motor??
> >
> > Neil Vedder
> >
> > *************************************************************
There WAS a Dodge 2x4 aluminum intake WITH a factory number on it.
I have Seen this critter with mine own eye orbs.
it is reported to be a critter of less then 100,  Nascar was the
intended application.
IT was cast by Offy I believe WITH the Dodge part num on it!!
This particular intake was for the hemi I recall.
I think the First year the 318 was offered the d500 - X(?) with the 2x4
was the 354???
Seem to recall that the 58's had a 2x4,  on the 318 ??  on a 350 ??

--
Paul Holmgren
2 57 300-C's in Indy
Hoosier Corps L#6

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1