Re: [FWDLK] Bearing Stuck

[David Wallace <dswallace@xxxxxxxxxxxx>]

Did you pack the bearing before you put them in?
David Wallace
58 Fury
----- Original Message ----- 
From: "Ron Waters" <ronbo97@xxxxxxxxxxx>
To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Friday, July 22, 2005 5:56 PM
Subject: [FWDLK] Bearing Stuck


> Hi List -
>
> I am doing the brakes on my 58 Ply. When I pulled the drums a couple of
> years ago, before remounting I installed brand new  inner and outer
> bearings, as well as the inner seal, and then greased everything.  Today,
> when I went to remove the front drums, one had difficulty coming off. When 
> I
> finally removed it, the seal and inner bearing remained on the steering
> knuckle. I had great difficulty removing the bearing but eventually got it
> off (will probably replace it, considering it's importance). Why would a
> brand new bearing get stuck like this ? Poor manufacture ? The other side
> came off with no problem.
>
> Ron
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1