[FWDLK] Headers & fan clutches
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[FWDLK] Headers & fan clutches



I was re-reading my 2/58 Motor Life, and LO!
there on page 10 is a picture of Hedman Header's 1957 PLY exhaust
headers!

They look OK, but are a 2-into-one-into-one
design, but with a relatively long exhaust-pipe section. 

The mini-ad ("Motor Life Goes Shopping") touts 10% increased horsepower
and economy.

There should be enuf 'room' to fab-up a 4-into-
one manifold, but a couple tubes would probably have to 'go'
up-and-over/around the other 2 tubes--this Hedman design looks pretty
compact.

Then, on page 14 is the 1/4 page ad for the : "Fan-O'matic"  fan clutch,
that promises :
" 20 more HP @ cruising speeds... &  up to  3 more MPG (by actual road
tests)".

JFG, I'm going to make jaypegs of these 2 ads, so, if anyone has a
'site', they can PM me, & I'll send them  'there', so anyone interested,
here,   could visit that site & look @ the pics/ads. 

btw, I previously contacted Hedman, & learned that they had been
bought-out by a company, and that the 'old' header-specs had been
discarded, a "long time" ago.

Neil Vedder

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.