Just brake cleaner will do it. If you get the kind in the jug, you can soak the shoes overnight. An old mechanic's trick is to soak them in brake cleaner then light them on fire. They will get nice and hot and the soaked in fluid will bubble out. The fire is substantially less heat than the shoes get in use, so it should be fine. I've done this on my DeSoto with no ill effects, and it was the only thing that cured my 'grabbing' problem. -Dave -----Original Message----- From: Forward Look Mopar Discussion List [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of Ron Waters Sent: Monday, September 12, 2005 6:39 PM To: L-FORWARDLOOK@xxxxxxxxxxxxx Subject: [FWDLK] Brake Fluid Leak onto Drums, Shoes Hi Gang - I found out why I was having trouble bleeding the brakes on my 58 Plymouth. The S-shaped connector line between the two wheel cyl's was leaking at one of the nuts. The result was that brake fluid leaked onto the drum and shoes. What can be done to clean the shoes, which have a portion that is saturated with fluid ? Is there a quick way of cleaning the drums, which are also covered with brake fluid on the inside.? Thanks, Ron ************************************************************* To unsubscribe or set your subscription options, please go to http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 ************************************************************* To unsubscribe or set your subscription options, please go to http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 |