Re: [FWDLK] Brake Bleeder Wrench

[Jack Johnson <johnaire@xxxxxxxxxxxxxxx>]

Ron,
  This one is a Johnson wrench.  After loosening the  bleeder screw with a 
6 point socket, I use a modified 6 point box end wrench I bent for the 
occasion.  It is a 3/8" wrench I heated  and bent with two 90 degree angles 
on it.  I put the wrench on then put my bleeder hose on it and am able to 
turn the screw open and closed without removing the hose.  I use it for all 
the brakes I bleed.  If you want a photo. I can photo it and send it.
Jack Johnson  Shinglehouse, Pa


----- Original Message ----- 
From: "Ron Waters" <ronbo97@xxxxxxxxxxx>
To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Friday, September 23, 2005 9:04 AM
Subject: [FWDLK] Brake Bleeder Wrench


> Hey gang -
>
> Can anyone recommend a brake bleeder wrench made by KD, NAPA, etc. for our
> FL wheel cylinders ? It's a pain in the butt to open the bleeder screws 
> with
> a conventional wrench.
>
> Ron
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1