Re: [FWDLK] Limeys !!!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Limeys !!!



I agree that Muriatic acid (see definition below) will clean off the lime (calcium sulfate) deposits well.  There are some risks that need to be addressed.  Acid residue will eat through the paint and steel.  Look under your battery to see what Sulfuric acid does.  If strong acids are used, do not let any get under the chrome around the window and neutralize the acid with something like baking soda to prevent corrosion of paint and steel.
 
Another useful acid is phosphoric acid (naval jelly)  This converts red rust into black rust really well.  It also leaves an intermetalic coating on the steel that paint really adheres to.  CLR is basically Phosphoric acid.  Phosphoric acid residue attacks paint and steel so it also needs to be neutralized.  By the way, Coca Cola has a ton of phosphoric acid in it.  Put some baby teeth in Coke for a few days and they will disappear or crumble.
 
Vinegar will remove the white haze somewhat.  Acetic acid is slow acting but with some elbow grease it will work.  Acetic acid takes longer but will attack paint and steel, so neutralize.
 
Glass is a liquid.  Glass seems solid, but the molecules move around slowly (meeting the definition of a liquid).  Checkout old glass in museums and the bottom will be thicker than the top because of sagging over time.  Because glass molecules move around, some of the calcium buildup may be entrained in the glass surface.  This is where glass polishing kits help remove the top surface of the glass.  The result is clear windows.  Be careful to not generate heat or a stress riser will form and the glass will break.
 
let me know if anyone found this info helpful.
 
FYI   mu·ri·at·ic (myr-tk)  adj.
Relating to brine.

\Mu`ri*at"ic\, a. [L. muriaticus pickled, from muria brine: cf. F. muriatique.] (Chem.) Of, pertaining to, or obtained from, sea salt, or from chlorine, one of the constituents of sea salt; hydrochloric.

Muriatic acid, hydrochloric acid, HCl; -- formerly called also marine acid, and spirit of salt.

 
Ken Rimington
1956 Dodge Custom Royal
1956 Dodge Royal
 
 

HelloList! The stuff your asking about is CLR Rust and Calcium Remover will work but is dilutted down so its safer for use by a novice.Murriatic Acid is much stronger   

. . .  It appears that this “film” was left there by leaves and various crap, as the car sat outside for years. It is NOT delamination of the glass – it most definitely is on the outside.  It looks like whitish, frosty stuff… almost like what it would look like if the glass had been sandblasted.

 

It’s really strange, careful work with a razor blade will remove some of it, but it’s very slow and tedious. In some areas, the razor blade won’t even remove it.

 

Has anyone experienced anything like this and come up with a solution for getting rid of this crap ?   

 

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.