Re: [FWDLK] 61 Plodge
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] 61 Plodge



Thank you to all who answered my 61 Plodge Story question.  I did not
recall seeing the story here before and if I did it did not catch my eye. 
Seeing this "thing" in photos in MCG got my attention.  I forwarded some of
the info I got to MCG.  I feel bad that they (along with Hemmings)got
burnt.  Being up front that the car was someones creation would be more
honest.  But if the car is passed on the dumped in a field like reported in
the story, who knows the history at that point. Enough said.  Thanks again
for all you help.

Mike Morelli
57 Plymouth Blvdr. 4dr hdtp
58 Plymouth Blvdr. 2dr hdtp

Original Message:
-----------------
From: L-FORWARDLOOK automatic digest system LISTSERV@xxxxxxxxxxxxx
Date: Thu, 30 Mar 2006 00:03:46 -0500
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: L-FORWARDLOOK Digest - 28 Mar 2006 to 29 Mar 2006 (#2006-88)


There are 14 messages totalling 2773 lines in this issue.

Topics of the day:

  1. Engine size for 1955 Belvedere
  2. 1961 Plodge story (5)
  3. Turbine Cars
  4. still need good used or NOS '56 Ply V8 motor mounts
  5. Thanks for the response... (2)
  6. Carpet Problems (4)

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

----------------------------------------------------------------------

Date:    Wed, 29 Mar 2006 00:45:43 -0800
From:    Bill Watson <wwatson5@xxxxxxxxx>
Subject: Re: Engine size for 1955 Belvedere

On American 1955 Plymouths, the change to the 259 (260) block came at engine
number P27-60201.

For Canadian 1955 Plymouths it was at P27-1489C (S/N 96,911,388) and Dodges
at D59-1499C (S/N 98,909,898).

For American 1956 Plymouths., engine numbers for the 277-cid engine :
P29-1001 to P29-40000
P29-80001 to P29-250000
P29-274001 to P28-329132

The American 1956 Plymouth 270-cid engine :
P29-40001 to P29-80000
P29-250001 to P29-274000

The American 1956 Fury 303-cid engine :
FP29-1001 & up

For Canadian 1956 Plymouths and Dodges, the 270-cid engine started at
P29-1001C  and  D61-1001C

The change to the 277-cid engine came at :
P29-6000C and  D61-6000C
Starting in 1956, Canadian Plymouth and Dodge engines were numbered
consecutively, with the make prefix added as needed.

Bill
Vancouver, BC



----- Original Message ----- 
From: "Bill K." <pontiac@xxxxxxxxxxxxxx>
To: "Bill Watson" <wwatson5@xxxxxxxxx>; <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Tuesday, March 28, 2006 8:50 PM
Subject: Re: [FWDLK] Engine size for 1955 Belvedere


> I remember the number on it is in the same place as a Chrysler 331/354,
top
> of block just ahead of the valley cover, but I don't remember which year
it
> came back to.
>
>
> I'm looking at the photo I took back then and it looks like P27-5xxx,
which
> would make it a '55 block and either a 241 or a 259 according to the book
I
> have.  This is the motor in the truck with the Dodge heads on it -
>
>
>
>
> My dumb question would be to find out if you could adapt a Borg-Warner T5
(5
> speed, 5th OD, used in S10, Camaro, Mustang, some Jeeps) behind the Dodge
> 241 block family.   For what it's worth, they have adapters to run them
> behind flatheads and they'll work behind Chevy 216/235 I6 and V8 if you
use
> the right bellhousing and shorten the input shaft one inch or use an
adapter
> plate.
>
> My guess is the fastest way to find out would be to round up a Dodge
manual
> bell and trans and the right bell and the T5 and compare to see how
> different things are.   If you still have that extra inch on the input
> shaft, it shouldn't be a big deal to whip up a spacer/adapter.
>
>
>
> Bill K.
>
>
>
>
>
> ----- Original Message -----
> From: "Bill Watson" <wwatson5@xxxxxxxxx>
> To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
> Sent: Tuesday, March 28, 2006 11:29 PM
> Subject: Re: [FWDLK] Engine size for 1955 Belvedere
>
>
> > No, the Dodge 241 is a totally different engine from the A block (277,
> 301,
> > 303, 313, 318, 326).  The bore centres on the A are larger than on the
> > Dodge.
> >
> > The 1955 Plymouth poly V8 (241, 260) was based on the Dodge block, the
one
> > that came out in 1953 as a hemi.   For 1956, Plymouth offered the poly
270
> > (based on the Dodge 241) and the new A block poly 277.   The A block was
> the
> > be Plymouth's engine, but as things turned out, it became a corporate
> block
> > along with the wedge B and RB blocks.
> >
> > As for the engine in the 1955 or 1956 Plymouth, what is the engine
number?
> > It is stamped on the front of the left cylinder bank, just below the
head.
> > >From that you can determine just what you have.
> >
> > The Dodge block can be converted to either poly or hemi, but the
> Plymouth/A
> > block came only as a poly and there are no hemi heads that will fit.
> >
> > Bill
> > Vancouver, BC
> >
> >
> > ----- Original Message -----
> > From: "Bill K." <pontiac@xxxxxxxxxxxxxx>
> > To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
> > Sent: Tuesday, March 28, 2006 6:51 PM
> > Subject: Re: [FWDLK] Engine size for 1955 Belvedere
> >
> >
> > > I believe the Dodge hemi/poly and Plymouth poly in this series are all
> > > basically the same block, from the 241 up through the 318 and Dodge
> > > 325/326 -
> > >
> > >
> > > My friend has this oddball mud truck he picked up that has a huge
frame,
> > > military axles and tires, a '72 Ford cab, a '70's GM bed, and the
engine
> > is
> > > a Hemi. We looked up the block number and it comes back to either '55
or
> > '56
> > > Plymouth; the heads apparently are Dodge (valve covers are plain).  It
> > runs
> > > pretty good, too.
> > >
> > > It does lead to the question of how much the Plymouth blocks could be
> > bored
> > > out, too, I wouldn't be surprised to find out this was bored but the
> only
> > > way to know would be to tear it down.
> > >
> > >
> > >
> > > Bill K.
> > >
> > > ----- Original Message -----
> > > From: "Fury Jim" <JRawa@xxxxxxx>
> > > To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
> > > Sent: Tuesday, March 28, 2006 9:34 PM
> > > Subject: Re: [FWDLK] Engine size for 1955 Belvedere
> > >
> > >
> > > > yep, the 277 definitely is a 56 all models, and 57 plaza only motor,
> > > there
> > > > was also the dodge series poly 270, which i have in a 56 savoy, and
> > think
> > > > some late 55's also had thrown in down in moparland.  the 277 valve
> > cover
> > > looks
> > > > like that of the 301/303/318/326
> > > >
> >
> > *************************************************************
> >
> > To unsubscribe or set your subscription options, please go to
> > http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
> >
> >
> > --
> > No virus found in this incoming message.
> > Checked by AVG Free Edition.
> > Version: 7.1.385 / Virus Database: 268.3.3/295 - Release Date: 3/28/2006
> >
> >
>
>
>
> -- 
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.385 / Virus Database: 268.3.3/295 - Release Date: 3/28/2006
>

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

------------------------------

Date:    Wed, 29 Mar 2006 10:15:03 -0500
From:    Ron Waters <ronbo97@xxxxxxxxxxx>
Subject: Re: 1961 Plodge story

This is a multi-part message in MIME format.

------=_NextPart_000_006A_01C65319.A4C2B770
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

"many of them were sent back to the factory and destroyed, as they were =
considered too ugly to sell. "

I wonder where PaulG gets his 'facts'. I guess if he can fabricate cars, =
he can also fabricate myths.

Ron
  ----- Original Message -----=20
  From: Jim Hoekendijk=20
  To: L-FORWARDLOOK@xxxxxxxxxxxxx=20
  Sent: Tuesday, March 28, 2006 8:21 PM
  Subject: Re: [FWDLK] 1961 Plodge story


  Thanks Tony,

  The link you provided didn't work with me.

  In case it doesn't work with others either:

  =
http://clubs.hemmings.com/clubsites/lambdacarclub/Gallery/PaulG/1PaulGFra=
me.html

  =20

  Jim Hoekendijk

  The Netherlands

  '57 Dodge D500

  =20


-------------------------------------------------------------------------=
-----

  Van: Forward Look Mopar Discussion List =
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] Namens Tony Boatman
  Verzonden: dinsdag 28 maart 2006 18:32
  Aan: L-FORWARDLOOK@xxxxxxxxxxxxx
  Onderwerp: Re: [FWDLK] 1961 Plodge story

  =20

  This beast was discussed about a year ago, and the prevailing feeling =
was that it was a Frankenstein's monster created by a guy in Michigan =
who was either dishonest or just had a wild sense of humor.  You can =
find pictures of it on www.lambdacarclub.com then clicking on "Gallery" =
then "Member" and scrolling down until you see "Paul G's" car.  That's =
it.=20

  =20

  Tony Boatman

  Boise, Idaho

  57 Dodge CRL

  69 Barracuda convertible

  =20

  -----Original Message-----
  From: Forward Look Mopar Discussion List =
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of Jackie Wrinkles
  Sent: Monday, March 27, 2006 7:44 PM
  To: L-FORWARDLOOK@xxxxxxxxxxxxx
  Subject: Re: [FWDLK] 1961 Plodge story

  =20

  I have heard of that car and as of yet I still have not got the whole =
story on it.Does anyone know if it real or just someone's =
creation?Thanks all.Jack in Michigan


  *************************************************************

  To unsubscribe or set your subscription options, please go to=20
  http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1=20


  *************************************************************

  To unsubscribe or set your subscription options, please go to=20
  http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1=20

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1

------=_NextPart_000_006A_01C65319.A4C2B770
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML xmlns=3D"http://www.w3.org/TR/REC-html40"; xmlns:v =3D=20
"urn:schemas-microsoft-com:vml" xmlns:o =3D=20
"urn:schemas-microsoft-com:office:office" xmlns:w =3D=20
"urn:schemas-microsoft-com:office:word" xmlns:st1 =3D=20
"urn:schemas-microsoft-com:office:smarttags"><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1528" name=3DGENERATOR><!--[if !mso]>
<STYLE>v\:* {
	BEHAVIOR: url(#default#VML)
}
o\:* {
	BEHAVIOR: url(#default#VML)
}
w\:* {
	BEHAVIOR: url(#default#VML)
}
.shape {
	BEHAVIOR: url(#default#VML)
}
</STYLE>
<![endif]--><o:SmartTagType name=3D"country-region"=20
namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags"></o:SmartTagT=
ype><o:SmartTagType=20
name=3D"City"=20
namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags"></o:SmartTagT=
ype><o:SmartTagType=20
name=3D"State"=20
namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags"></o:SmartTagT=
ype><o:SmartTagType=20
name=3D"place"=20
namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags"></o:SmartTagT=
ype><o:SmartTagType=20
name=3D"PersonName"=20
namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags"></o:SmartTagT=
ype><!--[if !mso]>
<STYLE>
st1\:*{behavior:url(#default#ieooui) }
</STYLE>
<![endif]-->
<STYLE>
<!--
 /* Font Definitions */
 @font-face
	{font-family:Tahoma;
	panose-1:2 11 6 4 3 5 4 4 2 4;}
 /* Style Definitions */
 p.MsoNormal, li.MsoNormal, div.MsoNormal
	{margin:0cm;
	margin-bottom:.0001pt;
	font-size:12.0pt;
	font-family:"Times New Roman";}
a:link, span.MsoHyperlink
	{color:blue;
	text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
	{color:purple;
	text-decoration:underline;}
span.emailstyle17
	{font-family:Arial;
	color:navy;}
span.E-mailStijl18
	{mso-style-type:personal-reply;
	font-family:Arial;
	color:navy;}
@page Section1
	{size:612.0pt 792.0pt;
	margin:72.0pt 90.0pt 72.0pt 90.0pt;}
div.Section1
	{page:Section1;}
-->
</STYLE>
<!--[if gte mso 9]><xml>
 <o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
 <o:shapelayout v:ext=3D"edit">
  <o:idmap v:ext=3D"edit" data=3D"1" />
 </o:shapelayout></xml><![endif]--></HEAD>
<BODY lang=3DNL id=3Drole_body bottomMargin=3D7 vLink=3Dpurple =
link=3Dblue bgColor=3D#ffffff=20
leftMargin=3D7 topMargin=3D7 rightMargin=3D7>
<DIV><STRONG><FONT color=3D#000080 size=3D2>"many of them were sent back =
to the=20
factory and destroyed, as they were considered too ugly to=20
sell.?"</FONT></STRONG></DIV>
<DIV><STRONG><FONT color=3D#000080 size=3D2></FONT></STRONG>?</DIV>
<DIV><FONT size=3D2>I wonder where PaulG gets his 'facts'. I guess if he =
can=20
fabricate cars, he can also fabricate myths.</FONT></DIV>
<DIV><FONT size=3D2></FONT>?</DIV>
<DIV><FONT size=3D2>Ron</FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
  <DIV style=3D"FONT: 10pt arial">----- Original Message ----- </DIV>
  <DIV=20
  style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>=20
  <A title=3DJim.Hoekendijk@xxxxxx =
href=3D"mailto:Jim.Hoekendijk@xxxxxx";>Jim=20
  Hoekendijk</A> </DIV>
  <DIV style=3D"FONT: 10pt arial"><B>To:</B> <A =
title=3DL-FORWARDLOOK@xxxxxxxxxxxxx=20
  =
href=3D"mailto:L-FORWARDLOOK@xxxxxxxxxxxxx";>L-FORWARDLOOK@xxxxxxxxxxxxx</=
A>=20
  </DIV>
  <DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Tuesday, March 28, 2006 =
8:21=20
  PM</DIV>
  <DIV style=3D"FONT: 10pt arial"><B>Subject:</B> Re: [FWDLK] 1961 =
Plodge=20
  story</DIV>
  <DIV><BR></DIV>
  <DIV class=3DSection1>
  <P class=3DMsoNormal><FONT face=3DArial color=3Dnavy size=3D2><SPAN =
lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Thanks=20
  Tony,<o:p></o:p></SPAN></FONT></P>
  <P class=3DMsoNormal><FONT face=3DArial color=3Dnavy size=3D2><SPAN =
lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">The link =
you provided=20
  didn=92t work with me.<o:p></o:p></SPAN></FONT></P>
  <P class=3DMsoNormal><FONT face=3DArial color=3Dnavy size=3D2><SPAN =
lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">In case it =
doesn=92t=20
  work with others either:<o:p></o:p></SPAN></FONT></P>
  <P class=3DMsoNormal><FONT face=3DArial color=3Dnavy size=3D2><SPAN =
lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"><A=20
  =
href=3D"http://clubs.hemmings.com/clubsites/lambdacarclub/Gallery/PaulG/1=
PaulGFrame.html">http://clubs.hemmings.com/clubsites/lambdacarclub/Galler=
y/PaulG/1PaulGFrame.html</A><o:p></o:p></SPAN></FONT></P>
  <P class=3DMsoNormal><FONT face=3DArial color=3Dnavy size=3D2><SPAN =
lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: =
Arial"><o:p>?</o:p></SPAN></FONT></P>
  <P class=3DMsoNormal><st1:PersonName w:st=3D"on" ProductID=3D"Jim =
Hoekendijk"><FONT=20
  face=3DArial color=3Dnavy size=3D2><SPAN lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Jim=20
  Hoekendijk</SPAN></FONT></st1:PersonName><FONT face=3DArial =
color=3Dnavy=20
  size=3D2><SPAN lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: =
Arial"><o:p></o:p></SPAN></FONT></P>
  <P class=3DMsoNormal><FONT face=3DArial color=3Dnavy size=3D2><SPAN =
lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">The=20
  <st1:country-region w:st=3D"on"><st1:place=20
  =
w:st=3D"on">Netherlands</st1:place></st1:country-region><o:p></o:p></SPAN=
></FONT></P>
  <P class=3DMsoNormal><FONT face=3DArial color=3Dnavy size=3D2><SPAN =
lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">=9257 Dodge =

  D500<o:p></o:p></SPAN></FONT></P>
  <P class=3DMsoNormal><FONT face=3DArial color=3Dnavy size=3D2><SPAN =
lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: =
Arial"><o:p>?</o:p></SPAN></FONT></P>
  <DIV>
  <DIV style=3D"MARGIN-LEFT: 35.4pt">
  <DIV class=3DMsoNormal style=3D"TEXT-ALIGN: center" =
align=3Dcenter><FONT=20
  face=3D"Times New Roman" size=3D3><SPAN style=3D"FONT-SIZE: 12pt">
  <HR tabIndex=3D-1 align=3Dcenter width=3D"100%" SIZE=3D2>
  </SPAN></FONT></DIV></DIV>
  <P class=3DMsoNormal style=3D"MARGIN-LEFT: 35.4pt"><B><FONT =
face=3DTahoma=20
  size=3D2><SPAN=20
  style=3D"FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: =
Tahoma">Van:</SPAN></FONT></B><FONT=20
  face=3DTahoma size=3D2><SPAN style=3D"FONT-SIZE: 10pt; FONT-FAMILY: =
Tahoma"> Forward=20
  Look Mopar Discussion List [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] =
<B><SPAN=20
  style=3D"FONT-WEIGHT: bold">Namens </SPAN></B><st1:PersonName =
w:st=3D"on"=20
  ProductID=3D"Tony Boatman">Tony Boatman</st1:PersonName><BR><B><SPAN=20
  style=3D"FONT-WEIGHT: bold">Verzonden:</SPAN></B> dinsdag 28 maart =
2006=20
  18:32<BR><B><SPAN style=3D"FONT-WEIGHT: bold">Aan:</SPAN></B>=20
  L-FORWARDLOOK@xxxxxxxxxxxxx<BR><B><SPAN=20
  style=3D"FONT-WEIGHT: bold">Onderwerp:</SPAN></B> Re: [FWDLK] 1961 =
Plodge=20
  story</SPAN></FONT><o:p></o:p></P></DIV>
  <P class=3DMsoNormal style=3D"MARGIN-LEFT: 35.4pt"><FONT face=3D"Times =
New Roman"=20
  size=3D3><SPAN style=3D"FONT-SIZE: =
12pt"><o:p>?</o:p></SPAN></FONT></P>
  <P class=3DMsoNormal style=3D"MARGIN-LEFT: 35.4pt"><FONT face=3DArial =
color=3Dnavy=20
  size=3D2><SPAN lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">This beast =
was=20
  discussed about a year ago, and the prevailing feeling was that it was =
a=20
  Frankenstein=92s monster created by a guy in <st1:State =
w:st=3D"on"><st1:place=20
  w:st=3D"on">Michigan</st1:place></st1:State> who was either dishonest =
or just=20
  had a wild sense of humor.? You can find pictures of it on <A=20
  href=3D"http://www.lambdacarclub.org/";>www.lambdacarclub.com</A> then =
clicking=20
  on =93Gallery=94 then =93Member=94 and scrolling down until you see =
=93Paul G=92s=94=20
  car.? That=92s it. </SPAN></FONT><SPAN =
lang=3DEN-US><o:p></o:p></SPAN></P>
  <P class=3DMsoNormal style=3D"MARGIN-LEFT: 35.4pt"><FONT face=3DArial =
color=3Dnavy=20
  size=3D2><SPAN lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: =
Arial">?</SPAN></FONT><SPAN=20
  lang=3DEN-US><o:p></o:p></SPAN></P>
  <P class=3DMsoNormal style=3D"MARGIN-LEFT: 35.4pt"><st1:PersonName =
w:st=3D"on"=20
  ProductID=3D"Tony Boatman"><FONT face=3DArial color=3Dnavy =
size=3D2><SPAN lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Tony=20
  Boatman</SPAN></FONT></st1:PersonName><SPAN =
lang=3DEN-US><o:p></o:p></SPAN></P>
  <P class=3DMsoNormal style=3D"MARGIN-LEFT: 35.4pt"><st1:place =
w:st=3D"on"><st1:City=20
  w:st=3D"on"><FONT face=3DArial color=3Dnavy size=3D2><SPAN =
lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: =
Arial">Boise</SPAN></FONT></st1:City><FONT=20
  face=3DArial color=3Dnavy size=3D2><SPAN lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">, =
<st1:State=20
  w:st=3D"on">Idaho</st1:State></SPAN></FONT></st1:place><SPAN=20
  lang=3DEN-US><o:p></o:p></SPAN></P>
  <P class=3DMsoNormal style=3D"MARGIN-LEFT: 35.4pt"><FONT face=3DArial =
color=3Dnavy=20
  size=3D2><SPAN lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">57 Dodge=20
  CRL</SPAN></FONT><SPAN lang=3DEN-US><o:p></o:p></SPAN></P>
  <P class=3DMsoNormal style=3D"MARGIN-LEFT: 35.4pt"><FONT face=3DArial =
color=3Dnavy=20
  size=3D2><SPAN lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">69 =
Barracuda=20
  convertible</SPAN></FONT><SPAN lang=3DEN-US><o:p></o:p></SPAN></P>
  <P class=3DMsoNormal style=3D"MARGIN-LEFT: 35.4pt"><FONT face=3DArial =
color=3Dnavy=20
  size=3D2><SPAN lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: =
Arial">?</SPAN></FONT><SPAN=20
  lang=3DEN-US><o:p></o:p></SPAN></P>
  <P class=3DMsoNormal style=3D"MARGIN-LEFT: 71.4pt"><FONT face=3DTahoma =
size=3D2><SPAN=20
  lang=3DEN-US style=3D"FONT-SIZE: 10pt; FONT-FAMILY: =
Tahoma">-----Original=20
  Message-----<BR><B><SPAN style=3D"FONT-WEIGHT: bold">From:</SPAN></B> =
Forward=20
  Look Mopar Discussion List [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] =
<B><SPAN=20
  style=3D"FONT-WEIGHT: bold">On Behalf Of </SPAN></B>Jackie =
Wrinkles<BR><B><SPAN=20
  style=3D"FONT-WEIGHT: bold">Sent:</SPAN></B> Monday, March 27, 2006 =
7:44=20
  PM<BR><B><SPAN style=3D"FONT-WEIGHT: bold">To:</SPAN></B>=20
  L-FORWARDLOOK@xxxxxxxxxxxxx<BR><B><SPAN=20
  style=3D"FONT-WEIGHT: bold">Subject:</SPAN></B> Re: [FWDLK] 1961 =
Plodge=20
  story</SPAN></FONT><SPAN lang=3DEN-US><o:p></o:p></SPAN></P>
  <P class=3DMsoNormal style=3D"MARGIN-LEFT: 71.4pt"><FONT face=3D"Times =
New Roman"=20
  size=3D3><SPAN lang=3DEN-US=20
  style=3D"FONT-SIZE: 12pt">?<o:p></o:p></SPAN></FONT></P>
  <DIV>
  <P class=3DMsoNormal style=3D"MARGIN-LEFT: 71.4pt"><FONT face=3DArial =
color=3Dblack=20
  size=3D2><SPAN lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">I have =
heard of that=20
  car and as of yet I still have not got the whole story on it.Does =
anyone know=20
  if it real or just someone's creation?Thanks all.Jack in <st1:State=20
  w:st=3D"on"><st1:place=20
  w:st=3D"on">Michigan</st1:place></st1:State></SPAN></FONT><SPAN=20
  lang=3DEN-US><o:p></o:p></SPAN></P></DIV></DIV>
  <P><FONT face=3DArial size=3D2></FONT></P>
  <P><FONT face=3DArial=20
  =
size=3D2>*************************************************************</F=
ONT></P>
  <P><FONT face=3DArial size=3D2>To unsubscribe or set your subscription =
options,=20
  please go to <BR><A=20
  =
href=3D"http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1"=
>http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1</A>=20
  </FONT></P>
  <P><FONT face=3DArial size=3D2></FONT></P>
  <P><FONT face=3DArial=20
  =
size=3D2>*************************************************************</F=
ONT></P>
  <P><FONT face=3DArial size=3D2>To unsubscribe or set your subscription =
options,=20
  please go to <BR><A=20
  =
href=3D"http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1"=
>http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1</A>=20
  </FONT></P></BLOCKQUOTE></BODY></HTML>
<p><font face=3D"Arial" size=3D"2"></font></p>
<p><font face=3D"Arial" size=3D"2">
*************************************************************</font></p>
<p><font face=3D"Arial" size=3D"2">To unsubscribe or set your subscription
options,
please go to <br>
<a href=3D"http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1";>
http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1</a> </font></p>

------=_NextPart_000_006A_01C65319.A4C2B770--

------------------------------

Date:    Wed, 29 Mar 2006 15:06:14 +0000
From:    Jim Krausmann <kraus300@xxxxxxxxxxx>
Subject: Re: 1961 Plodge story

--NextPart_Webmail_9m3u9jl4l_18415_1143644774_0
Content-Type: text/plain
Content-Transfer-Encoding: 8bit

Did anyone let the magazine people know about the real history of the car?

Jim

-------------- Original message -------------- 
From: Ron Waters <ronbo97@xxxxxxxxxxx> 

"many of them were sent back to the factory and destroyed, as they were
considered too ugly to sell. "

I wonder where PaulG gets his 'facts'. I guess if he can fabricate cars, he
can also fabricate myths.

Ron
----- Original Message ----- 
From: Jim Hoekendijk 
To: L-FORWARDLOOK@xxxxxxxxxxxxx 
Sent: Tuesday, March 28, 2006 8:21 PM
Subject: Re: [FWDLK] 1961 Plodge story


Thanks Tony,
The link you provided didn?t work with me.
In case it doesn?t work with others either:
http://clubs.hemmings.com/clubsites/lambdacarclub/Gallery/PaulG/1PaulGFrame.
html
 
Jim Hoekendijk
The Netherlands
?57 Dodge D500
 



Van: Forward Look Mopar Discussion List
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] Namens Tony Boatman
Verzonden: dinsdag 28 maart 2006 18:32
Aan: L-FORWARDLOOK@xxxxxxxxxxxxx
Onderwerp: Re: [FWDLK] 1961 Plodge story
 
This beast was discussed about a year ago, and the prevailing feeling was
that it was a Frankenstein?s monster created by a guy in Michigan who was
either dishonest or just had a wild sense of humor.  You can find pictures
of it on www.lambdacarclub.com then clicking on ?Gallery? then ?Member? and
scrolling down until you see ?Paul G?s? car.  That?s it. 
 
Tony Boatman
Boise, Idaho
57 Dodge CRL
69 Barracuda convertible
 
-----Original Message-----
From: Forward Look Mopar Discussion List
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of Jackie Wrinkles
Sent: Monday, March 27, 2006 7:44 PM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: Re: [FWDLK] 1961 Plodge story
 
I have heard of that car and as of yet I still have not got the whole story
on it.Does anyone know if it real or just someone's creation?Thanks
all.Jack in Michigan
*************************************************************
To unsubscribe or set your subscription options, please go to 
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 
*************************************************************
To unsubscribe or set your subscription options, please go to 
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 
*************************************************************
To unsubscribe or set your subscription options, please go to 
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
--NextPart_Webmail_9m3u9jl4l_18415_1143644774_0
Content-Type: text/html
Content-Transfer-Encoding: 8bit

<html><body>
<DIV>Did anyone let the magazine people know about the real history of the
car?</DIV>
<DIV>?</DIV>
<DIV>Jim</DIV>
<DIV>?</DIV>
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT:
#1010ff 2px solid">-------------- Original message -------------- <BR>From:
Ron Waters <ronbo97@xxxxxxxxxxx> <BR>
<META content="MSHTML 6.00.2800.1528" name=GENERATOR>
<STYLE>v\:* {
	BEHAVIOR: url(#default#VML)
}
o\:* {
	BEHAVIOR: url(#default#VML)
}
w\:* {
	BEHAVIOR: url(#default#VML)
}
.shape {
	BEHAVIOR: url(#default#VML)
}
</STYLE>
<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office"
/><o:SmartTagType namespaceuri="urn:schemas-microsoft-com:office:smarttags"
name="country-region"></o:SmartTagType><o:SmartTagType
namespaceuri="urn:schemas-microsoft-com:office:smarttags"
name="City"></o:SmartTagType><o:SmartTagType
namespaceuri="urn:schemas-microsoft-com:office:smarttags"
name="State"></o:SmartTagType><o:SmartTagType
namespaceuri="urn:schemas-microsoft-com:office:smarttags"
name="place"></o:SmartTagType><o:SmartTagType
namespaceuri="urn:schemas-microsoft-com:office:smarttags"
name="PersonName"></o:SmartTagType>
<STYLE>
st1\:*{behavior:url(#default#ieooui) }
</STYLE>

<STYLE>
<!--
 /* Font Definitions */
 @font-face
	{font-family:Tahoma;
	panose-1:2 11 6 4 3 5 4 4 2 4;}
 /* Style Definitions */
 p.MsoNormal, li.MsoNormal, div.MsoNormal
	{margin:0cm;
	margin-bottom:.0001pt;
	font-size:12.0pt;
	font-family:"Times New Roman";}
a:link, span.MsoHyperlink
	{color:blue;
	text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
	{color:purple;
	text-decoration:underline;}
span.emailstyle17
	{font-family:Arial;
	color:navy;}
span.E-mailStijl18
	{mso-style-type:personal-reply;
	font-family:Arial;
	color:navy;}
@page Section1
	{size:612.0pt 792.0pt;
	margin:72.0pt 90.0pt 72.0pt 90.0pt;}
div.Section1
	{page:Section1;}
-->
</STYLE>

<DIV><STRONG><FONT color=#000080 size=2>"many of them were sent back to the
factory and destroyed, as they were considered too ugly to
sell.?"</FONT></STRONG></DIV>
<DIV><STRONG><FONT color=#000080 size=2></FONT></STRONG>?</DIV>
<DIV><FONT size=2>I wonder where PaulG gets his 'facts'. I guess if he can
fabricate cars, he can also fabricate myths.</FONT></DIV>
<DIV><FONT size=2></FONT>?</DIV>
<DIV><FONT size=2>Ron</FONT></DIV>
<BLOCKQUOTE dir=ltr style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px;
MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color:
black"><B>From:</B> <A title=Jim.Hoekendijk@xxxxxx
href="mailto:Jim.Hoekendijk@xxxxxx";>Jim Hoekendijk</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
title=L-FORWARDLOOK@xxxxxxxxxxxxx
href="mailto:L-FORWARDLOOK@xxxxxxxxxxxxx";>L-FORWARDLOOK@xxxxxxxxxxxxx</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Tuesday, March 28, 2006 8:21
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [FWDLK] 1961 Plodge
story</DIV>
<DIV><BR></DIV>
<DIV class=Section1>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Thanks
Tony,<o:p></o:p></SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">The link you
provided didn?t work with me.<o:p></o:p></SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">In case it doesn?t
work with others either:<o:p></o:p></SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"><A
href="http://clubs.hemmings.com/clubsites/lambdacarclub/Gallery/PaulG/1PaulG
Frame.html">http://clubs.hemmings.com/clubsites/lambdacarclub/Gallery/PaulG/
1PaulGFrame.html</A><o:p></o:p></SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY:
Arial"><o:p>?</o:p></SPAN></FONT></P>
<P class=MsoNormal><?xml:namespace prefix = st1 ns =
"urn:schemas-microsoft-com:office:smarttags" /><st1:PersonName
ProductID="Jim Hoekendijk" w:st="on"><FONT face=Arial color=navy
size=2><SPAN lang=EN-US style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY:
Arial">Jim Hoekendijk</SPAN></FONT></st1:PersonName><FONT face=Arial
color=navy size=2><SPAN lang=EN-US style="FONT-SIZE: 10pt; COLOR: navy;
FONT-FAMILY: Arial"><o:p></o:p></SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">The
<st1:country-region w:st="on"><st1:place
w:st="on">Netherlands</st1:place></st1:country-region><o:p></o:p></SPAN></FO
NT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">?57 Dodge
D500<o:p></o:p></SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY:
Arial"><o:p>?</o:p></SPAN></FONT></P>
<DIV>
<DIV style="MARGIN-LEFT: 35.4pt">
<DIV class=MsoNormal style="TEXT-ALIGN: center" align=center><FONT
face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt">
<HR tabIndex=-1 align=center width="100%" SIZE=2>
</SPAN></FONT></DIV></DIV>
<P class=MsoNormal style="MARGIN-LEFT: 35.4pt"><B><FONT face=Tahoma
size=2><SPAN style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY:
Tahoma">Van:</SPAN></FONT></B><FONT face=Tahoma size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Tahoma"> Forward Look Mopar Discussion
List [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] <B><SPAN style="FONT-WEIGHT:
bold">Namens </SPAN></B><st1:PersonName ProductID="Tony Boatman"
w:st="on">Tony Boatman</st1:PersonName><BR><B><SPAN style="FONT-WEIGHT:
bold">Verzonden:</SPAN></B> dinsdag 28 maart 2006 18:32<BR><B><SPAN
style="FONT-WEIGHT: bold">Aan:</SPAN></B>
L-FORWARDLOOK@xxxxxxxxxxxxx<BR><B><SPAN style="FONT-WEIGHT:
bold">Onderwerp:</SPAN></B> Re: [FWDLK] 1961 Plodge
story</SPAN></FONT><o:p></o:p></P></DIV>
<P class=MsoNormal style="MARGIN-LEFT: 35.4pt"><FONT face="Times New Roman"
size=3><SPAN style="FONT-SIZE: 12pt"><o:p>?</o:p></SPAN></FONT></P>
<P class=MsoNormal style="MARGIN-LEFT: 35.4pt"><FONT face=Arial color=navy
size=2><SPAN lang=EN-US style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY:
Arial">This beast was discussed about a year ago, and the prevailing
feeling was that it was a Frankenstein?s monster created by a guy in
<st1:State w:st="on"><st1:place w:st="on">Michigan</st1:place></st1:State>
who was either dishonest or just had a wild sense of humor.? You can find
pictures of it on <A
href="http://www.lambdacarclub.org/";>www.lambdacarclub.com</A> then
clicking on ?Gallery? then ?Member? and scrolling down until you see ?Paul
G?s? car.? That?s it. </SPAN></FONT><SPAN lang=EN-US><o:p></o:p></SPAN></P>
<P class=MsoNormal style="MARGIN-LEFT: 35.4pt"><FONT face=Arial color=navy
size=2><SPAN lang=EN-US style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY:
Arial">?</SPAN></FONT><SPAN lang=EN-US><o:p></o:p></SPAN></P>
<P class=MsoNormal style="MARGIN-LEFT: 35.4pt"><st1:PersonName
ProductID="Tony Boatman" w:st="on"><FONT face=Arial color=navy size=2><SPAN
lang=EN-US style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Tony
Boatman</SPAN></FONT></st1:PersonName><SPAN
lang=EN-US><o:p></o:p></SPAN></P>
<P class=MsoNormal style="MARGIN-LEFT: 35.4pt"><st1:place
w:st="on"><st1:City w:st="on"><FONT face=Arial color=navy size=2><SPAN
lang=EN-US style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY:
Arial">Boise</SPAN></FONT></st1:City><FONT face=Arial color=navy
size=2><SPAN lang=EN-US style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY:
Arial">, <st1:State
w:st="on">Idaho</st1:State></SPAN></FONT></st1:place><SPAN
lang=EN-US><o:p></o:p></SPAN></P>
<P class=MsoNormal style="MARGIN-LEFT: 35.4pt"><FONT face=Arial color=navy
size=2><SPAN lang=EN-US style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY:
Arial">57 Dodge CRL</SPAN></FONT><SPAN lang=EN-US><o:p></o:p></SPAN></P>
<P class=MsoNormal style="MARGIN-LEFT: 35.4pt"><FONT face=Arial color=navy
size=2><SPAN lang=EN-US style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY:
Arial">69 Barracuda convertible</SPAN></FONT><SPAN
lang=EN-US><o:p></o:p></SPAN></P>
<P class=MsoNormal style="MARGIN-LEFT: 35.4pt"><FONT face=Arial color=navy
size=2><SPAN lang=EN-US style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY:
Arial">?</SPAN></FONT><SPAN lang=EN-US><o:p></o:p></SPAN></P>
<P class=MsoNormal style="MARGIN-LEFT: 71.4pt"><FONT face=Tahoma
size=2><SPAN lang=EN-US style="FONT-SIZE: 10pt; FONT-FAMILY:
Tahoma">-----Original Message-----<BR><B><SPAN style="FONT-WEIGHT:
bold">From:</SPAN></B> Forward Look Mopar Discussion List
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] <B><SPAN style="FONT-WEIGHT: bold">On
Behalf Of </SPAN></B>Jackie Wrinkles<BR><B><SPAN style="FONT-WEIGHT:
bold">Sent:</SPAN></B> Monday, March 27, 2006 7:44 PM<BR><B><SPAN
style="FONT-WEIGHT: bold">To:</SPAN></B>
L-FORWARDLOOK@xxxxxxxxxxxxx<BR><B><SPAN style="FONT-WEIGHT:
bold">Subject:</SPAN></B> Re: [FWDLK] 1961 Plodge story</SPAN></FONT><SPAN
lang=EN-US><o:p></o:p></SPAN></P>
<P class=MsoNormal style="MARGIN-LEFT: 71.4pt"><FONT face="Times New Roman"
size=3><SPAN lang=EN-US style="FONT-SIZE:
12pt">?<o:p></o:p></SPAN></FONT></P>
<DIV>
<P class=MsoNormal style="MARGIN-LEFT: 71.4pt"><FONT face=Arial color=black
size=2><SPAN lang=EN-US style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY:
Arial">I have heard of that car and as of yet I still have not got the
whole story on it.Does anyone know if it real or just someone's
creation?Thanks all.Jack in <st1:State w:st="on"><st1:place
w:st="on">Michigan</st1:place></st1:State></SPAN></FONT><SPAN
lang=EN-US><o:p></o:p></SPAN></P></DIV></DIV>
<P><FONT face=Arial size=2></FONT></P>
<P><FONT face=Arial
size=2>*************************************************************</FONT><
/P>
<P><FONT face=Arial size=2>To unsubscribe or set your subscription options,
please go to <BR><A
href="http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1";>http://lists
.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1</A> </FONT></P>
<P><FONT face=Arial size=2></FONT></P>
<P><FONT face=Arial
size=2>*************************************************************</FONT><
/P>
<P><FONT face=Arial size=2>To unsubscribe or set your subscription options,
please go to <BR><A
href="http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1";>http://lists
.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1</A> </FONT></P></BLOCKQUOTE>
<P><FONT face=Arial size=2></FONT></P>
<P><FONT face=Arial
size=2>*************************************************************</FONT><
/P>
<P><FONT face=Arial size=2>To unsubscribe or set your subscription options,
please go to <BR><A
href="http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1";>http://lists
.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1</A>
</FONT></P></BLOCKQUOTE></body></html>
<p><font face="Arial" size="2"></font></p>
<p><font face="Arial" size="2">
*************************************************************</font></p>
<p><font face="Arial" size="2">To unsubscribe or set your subscription
options,
please go to <br>
<a href="http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1";>
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1</a> </font></p>

--NextPart_Webmail_9m3u9jl4l_18415_1143644774_0--

------------------------------

Date:    Wed, 29 Mar 2006 10:25:12 -0500
From:    "Dalton, Thomas E" <tdalton@xxxxxxxx>
Subject: Turbine Cars

This is a multi-part message in MIME format.

------_=_NextPart_001_01C65344.F90E5580
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable

Hello All,

I just wanted to see if we had any members with running Turbine cars? I
heard one go by at the Hershey PA swap.. It was sweeeet!!
=20
If someone has some.. Do you have any pics..

Thanks
Tom



***************************************************************************=
**
The information in this email is confidential and may be legally privileged=
.  It is intended solely for the addressee. Access to this email by anyone =
else is unauthorized.=20

If you are not the intended recipient, any disclosure, copying, distributio=
n or any action taken or omitted to be taken in reliance on it, is prohibit=
ed and may be unlawful. When addressed to our clients any opinions or advic=
e contained in this email are subject to the terms and conditions expressed=
 in the governing KPMG client engagement letter. =20
***************************************************************************=
**



*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1

------_=_NextPart_001_01C65344.F90E5580
Content-Type: text/html; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML xmlns:o =3D "urn:schemas-microsoft-com:office:office" xmlns:st1 =3D=
=20
"urn:schemas-microsoft-com:office:smarttags"><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; charset=3Dus-ascii">
<META content=3D"MSHTML 6.00.2800.1529" name=3DGENERATOR></HEAD>
<BODY>
<DIV><FONT face=3DTahoma color=3D#0000ff size=3D2><SPAN class=3D151042415-2=
9032006>Hello=20
All,</SPAN></FONT></DIV><FONT><SPAN class=3D151042415-29032006>
<DIV><BR><FONT face=3DTahoma color=3D#0000ff size=3D2>I just wanted to see =
if we had=20
any members with running Turbine cars? I heard one go by at the Hershey PA=
=20
swap.. It was sweeeet!!</FONT></DIV>
<DIV><FONT face=3DTahoma color=3D#0000ff size=3D2></FONT>?</DIV>
<DIV><SPAN class=3D151042415-29032006><FONT face=3DTahoma color=3D#0000ff s=
ize=3D2>If=20
someone has some.. Do you have any pics..<BR><BR>Thanks</FONT></SPAN></DIV>
<DIV><SPAN class=3D151042415-29032006><FONT face=3DTahoma color=3D#0000ff=
=20
size=3D2>Tom</FONT></SPAN></SPAN></FONT></DIV>
<P STYLE=3D"margin-top: 0pt;margin-bottom: 0pt;"><SPAN STYLE=3D"FONT-FAMILY=
:'Arial';FONT-SIZE:8pt;"> </SPAN>
</P>
<P STYLE=3D"margin-top: 0pt;margin-bottom: 0pt;"><SPAN STYLE=3D"FONT-FAMILY=
:'Arial';FONT-SIZE:8pt;">**************************************************=
*************************** </SPAN>
</P>
<P STYLE=3D"margin-top: 0pt;margin-bottom: 0pt;"><SPAN STYLE=3D"FONT-FAMILY=
:'Arial';FONT-SIZE:8pt;">The information in this email is confidential and =
may be legally privileged.  It is intended solely for the addressee. Access=
 to this email by anyone else is unauthorized.  </SPAN>
</P>
<P STYLE=3D"margin-top: 0pt;margin-bottom: 0pt;"><SPAN STYLE=3D"FONT-FAMILY=
:'Arial';FONT-SIZE:8pt;"> </SPAN>
</P>
<P STYLE=3D"margin-top: 0pt;margin-bottom: 0pt;"><SPAN STYLE=3D"FONT-FAMILY=
:'Arial';FONT-SIZE:8pt;">If you are not the intended recipient, any disclos=
ure, copying, distribution or any action taken or omitted to be taken in re=
liance on it, is prohibited and may be unlawful. When addressed to our clie=
nts any opinions or advice contained in this email are subject to the terms=
 and conditions expressed in the governing KPMG client engagement letter.  =
 </SPAN>
</P>
<P STYLE=3D"margin-top: 0pt;margin-bottom: 0pt;"><SPAN STYLE=3D"FONT-FAMILY=
:'Arial';FONT-SIZE:8pt;">**************************************************=
*************************** </SPAN>
</P>
<P STYLE=3D"margin-top: 0pt;margin-bottom: 0pt;"><SPAN STYLE=3D"FONT-FAMILY=
:'Arial';FONT-SIZE:8pt;"> </SPAN> </P></BODY></HTML>
<p><font face=3D"Arial" size=3D"2"></font></p>
<p><font face=3D"Arial" size=3D"2">
*************************************************************</font></p>
<p><font face=3D"Arial" size=3D"2">To unsubscribe or set your subscription
options,
please go to <br>
<a href=3D"http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1";>
http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1</a> </font></p>

------_=_NextPart_001_01C65344.F90E5580--

------------------------------

Date:    Wed, 29 Mar 2006 10:50:05 -0800
From:    Gary Pavlovich <glpavlovich@xxxxxxx>
Subject: still need good used or NOS '56 Ply V8 motor mounts

This is a multi-part message in MIME format.

------=_NextPart_000_000D_01C6531E.8A359710
Content-Type: text/plain;
	charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable

FLL,
Still looking for a set of good used '56 Ply V8 motor mounts; may be the =
same as '56 Dodge as well; please let me know if any of the list members =
have a set to sell.
Thanks again,
Gary Pavlovich

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1
------=_NextPart_000_000D_01C6531E.8A359710
Content-Type: text/html;
	charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Dwindows-1252">
<META content=3D"MSHTML 6.00.2900.2802" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>FLL,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Still looking for a set of good used =
'56 Ply V8=20
motor mounts; may be the same as '56 Dodge as well; please let me know =
if any of=20
the list members have a set to sell.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Thanks again,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Gary =
Pavlovich</FONT></DIV></BODY></HTML>
<p><font face=3D"Arial" size=3D"2"></font></p>
<p><font face=3D"Arial" size=3D"2">
*************************************************************</font></p>
<p><font face=3D"Arial" size=3D"2">To unsubscribe or set your subscription
options,
please go to <br>
<a href=3D"http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1";>
http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1</a> </font></p>

------=_NextPart_000_000D_01C6531E.8A359710--

------------------------------

Date:    Wed, 29 Mar 2006 12:38:33 -0700
From:    Mike & Sharon <clearcreek@xxxxxxxxxxxxxxxx>
Subject: Thanks for the response...

This is a multi-part message in MIME format.

------=_NextPart_000_002C_01C6532D.B11F4C90
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

I think that I now know much more than I need to or can remember.  =
Thanks for all the answers.  I'm pretty sure that I have a 259 (260) cid =
1955 Plymouth V8.

Another question.  On my trips to Denver to visit my daughter (and =
GRANDSON!) I pass by a 1955 Dodge two-door hardtop (Sport Coupe).  It is =
parked at an address on 74th street in Arvada.  Does anyone from the =
list own this beautiful car?  It looks in excellent condition, with =
Factory Wires!  I noticed that last year, for a period of a few months, =
it was replaced by a later model (mid 60's) Plymouth, under a tarp, then =
the Dodge returned. I sure would like to talk to the owner, maybe get =
him to let me sit in it???

Mike Higgins
1955 Belvedere Sport Coupe

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1
------=_NextPart_000_002C_01C6532D.B11F4C90
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1476" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>I think that I now know much more than =
I need to or=20
can remember.? Thanks for all the answers.? I'm pretty sure =
that I=20
have a 259 (260) cid 1955 Plymouth V8.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>?</DIV>
<DIV><FONT face=3DArial size=3D2>Another question.? On my trips to =
Denver to=20
visit my daughter (and GRANDSON!) I pass by a 1955 Dodge two-door =
hardtop (Sport=20
Coupe).? It is parked at an address on 74th street in Arvada.? =
Does=20
anyone from the list own this beautiful car?? It looks in excellent =

condition, with Factory Wires!? I noticed that last year, for =
a?period=20
of a few months, it was replaced by a later model (mid 60's) Plymouth, =
under a=20
tarp, then the Dodge returned. I sure would like to talk to the owner, =
maybe get=20
him to let me sit in it???</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>?</DIV>
<DIV><FONT face=3DArial size=3D2>Mike Higgins</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>1955 Belvedere Sport=20
Coupe</FONT></DIV></BODY></HTML>
<p><font face=3D"Arial" size=3D"2"></font></p>
<p><font face=3D"Arial" size=3D"2">
*************************************************************</font></p>
<p><font face=3D"Arial" size=3D"2">To unsubscribe or set your subscription
options,
please go to <br>
<a href=3D"http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1";>
http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1</a> </font></p>

------=_NextPart_000_002C_01C6532D.B11F4C90--

------------------------------

Date:    Wed, 29 Mar 2006 12:42:21 -0700
From:    Mike & Sharon <clearcreek@xxxxxxxxxxxxxxxx>
Subject: 1961 Plodge story

This is a multi-part message in MIME format.

------=_NextPart_000_003A_01C6532E.390A1180
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Thanks, Jim for the pictures link.  I remember last year when we =
discussed the car at length, and most decided that although it was a =
great fabricated story, the car itself was still beautiful.

Mike Higgins
1955 Bevedere Sport Coupe
  =
http://clubs.hemmings.com/clubsites/lambdacarclub/Gallery/PaulG/1PaulGFra=
me.html
  =20

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1

------=_NextPart_000_003A_01C6532E.390A1180
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML xmlns=3D"http://www.w3.org/TR/REC-html40"; xmlns:v =3D=20
"urn:schemas-microsoft-com:vml" xmlns:o =3D=20
"urn:schemas-microsoft-com:office:office" xmlns:w =3D=20
"urn:schemas-microsoft-com:office:word" xmlns:st1 =3D=20
"urn:schemas-microsoft-com:office:smarttags"><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1476" name=3DGENERATOR><!--[if !mso]>
<STYLE>v\:* {
	BEHAVIOR: url(#default#VML)
}
o\:* {
	BEHAVIOR: url(#default#VML)
}
w\:* {
	BEHAVIOR: url(#default#VML)
}
.shape {
	BEHAVIOR: url(#default#VML)
}
</STYLE>
<![endif]--><o:SmartTagType name=3D"country-region"=20
namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags"></o:SmartTagT=
ype><o:SmartTagType=20
name=3D"City"=20
namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags"></o:SmartTagT=
ype><o:SmartTagType=20
name=3D"State"=20
namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags"></o:SmartTagT=
ype><o:SmartTagType=20
name=3D"place"=20
namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags"></o:SmartTagT=
ype><o:SmartTagType=20
name=3D"PersonName"=20
namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags"></o:SmartTagT=
ype><!--[if !mso]>
<STYLE>
st1\:*{behavior:url(#default#ieooui) }
</STYLE>
<![endif]-->
<STYLE>
<!--
 /* Font Definitions */
 @font-face
	{font-family:Tahoma;
	panose-1:2 11 6 4 3 5 4 4 2 4;}
 /* Style Definitions */
 p.MsoNormal, li.MsoNormal, div.MsoNormal
	{margin:0cm;
	margin-bottom:.0001pt;
	font-size:12.0pt;
	font-family:"Times New Roman";}
a:link, span.MsoHyperlink
	{color:blue;
	text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
	{color:purple;
	text-decoration:underline;}
span.emailstyle17
	{font-family:Arial;
	color:navy;}
span.E-mailStijl18
	{mso-style-type:personal-reply;
	font-family:Arial;
	color:navy;}
@page Section1
	{size:612.0pt 792.0pt;
	margin:72.0pt 90.0pt 72.0pt 90.0pt;}
div.Section1
	{page:Section1;}
-->
</STYLE>
<!--[if gte mso 9]><xml>
 <o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
 <o:shapelayout v:ext=3D"edit">
  <o:idmap v:ext=3D"edit" data=3D"1" />
 </o:shapelayout></xml><![endif]--></HEAD>
<BODY lang=3DNL id=3Drole_body bottomMargin=3D7 vLink=3Dpurple =
link=3Dblue bgColor=3D#ffffff=20
leftMargin=3D7 topMargin=3D7 rightMargin=3D7>
<DIV><FONT face=3DArial size=3D2>Thanks, Jim for the pictures =
link.? I remember=20
last year when we discussed the car at length, and most decided that =
although it=20
was a great fabricated story, the car itself was still =
beautiful.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>?</DIV>
<DIV><FONT face=3DArial size=3D2>Mike Higgins</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>1955 Bevedere Sport Coupe</FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
  <DIV style=3D"FONT: 10pt arial"><FONT face=3DArial color=3Dnavy =
size=3D2><SPAN=20
  lang=3DEN-US style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: =
Arial"><A=20
  =
href=3D"http://clubs.hemmings.com/clubsites/lambdacarclub/Gallery/PaulG/1=
PaulGFrame.html">http://clubs.hemmings.com/clubsites/lambdacarclub/Galler=
y/PaulG/1PaulGFrame.html</A><o:p></o:p></SPAN></FONT></DIV>
  <DIV class=3DSection1>
  <P class=3DMsoNormal><FONT face=3DArial color=3Dnavy size=3D2><SPAN =
lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: =
Arial"><o:p>?</o:p></SPAN></FONT></P></DIV></BLOCKQUOTE></BODY></HTM=
L>
<p><font face=3D"Arial" size=3D"2"></font></p>
<p><font face=3D"Arial" size=3D"2">
*************************************************************</font></p>
<p><font face=3D"Arial" size=3D"2">To unsubscribe or set your subscription
options,
please go to <br>
<a href=3D"http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1";>
http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1</a> </font></p>

------=_NextPart_000_003A_01C6532E.390A1180--

------------------------------

Date:    Wed, 29 Mar 2006 14:11:30 -0600
From:    Ray Jones <hurst300@xxxxxxxxxxxx>
Subject: Re: Thanks for the response...

Just stop there!
Bring photos of your 55 Belvie, if you can't drive it there. I'd bet=20
he'd enjoy seeing the photos and would take your photo sitting in it so=20=

you could share the "Rest of the Story" with us.

All he can say is NO! Bet he won't!
Ray


On Mar 29, 2006, at 1:38 PM, Mike & Sharon wrote:

> I think that I now know much more than I need to or can remember.=A0=20=

> Thanks for all the answers.=A0 I'm pretty sure that I have a 259 (260)=20=

> cid 1955 Plymouth V8.
> =A0
> Another question.=A0 On my trips to Denver to visit my daughter (and=20=

> GRANDSON!) I pass by a 1955 Dodge two-door hardtop (Sport Coupe).=A0 =
It=20
> is parked at an address on 74th street in Arvada.=A0 Does anyone from=20=

> the list own this beautiful car?=A0 It looks in excellent condition,=20=

> with Factory Wires!=A0 I noticed that last year, for a=A0period of a =
few=20
> months, it was replaced by a later model (mid 60's) Plymouth, under a=20=

> tarp, then the Dodge returned. I sure would like to talk to the owner,=20=

> maybe get him to let me sit in it???
> =A0
> Mike Higgins
> 1955 Belvedere Sport Coupe
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1

------------------------------

Date:    Wed, 29 Mar 2006 12:23:34 -0800
From:    Bill/Pat Helm <modiggers@xxxxxxxxxxx>
Subject: Re: 1961 Plodge story

This is a multi-part message in MIME format.

------=_NextPart_000_003F_01C6532B.996CA090
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Thanks, Jim, for finally putting up a link that I could use.  I was =
wondering what all the fuss was about, and now I know. =20
Ya' know, in my opinion, neither the '61 Plymouths or Dodges were =
particularly "handsome."  But it looks like this guy has taken the best =
from both.  I LIKE IT!  And I especially like the color too!
/s/  Bill
Concord, CA
  ----- Original Message -----=20
  From: Jim Hoekendijk=20
  To: L-FORWARDLOOK@xxxxxxxxxxxxx=20
  Sent: Tuesday, March 28, 2006 5:21 PM
  Subject: Re: [FWDLK] 1961 Plodge story


  Thanks Tony,

  The link you provided didn't work with me.

  In case it doesn't work with others either:

  =
http://clubs.hemmings.com/clubsites/lambdacarclub/Gallery/PaulG/1PaulGFra=
me.html

  =20

  Jim Hoekendijk

  The Netherlands

  '57 Dodge D500

  =20


-------------------------------------------------------------------------=
-----

  Van: Forward Look Mopar Discussion List =
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] Namens Tony Boatman
  Verzonden: dinsdag 28 maart 2006 18:32
  Aan: L-FORWARDLOOK@xxxxxxxxxxxxx
  Onderwerp: Re: [FWDLK] 1961 Plodge story

  =20

  This beast was discussed about a year ago, and the prevailing feeling =
was that it was a Frankenstein's monster created by a guy in Michigan =
who was either dishonest or just had a wild sense of humor.  You can =
find pictures of it on www.lambdacarclub.com then clicking on "Gallery" =
then "Member" and scrolling down until you see "Paul G's" car.  That's =
it.=20

  =20

  Tony Boatman

  Boise, Idaho

  57 Dodge CRL

  69 Barracuda convertible

  =20

  -----Original Message-----
  From: Forward Look Mopar Discussion List =
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of Jackie Wrinkles
  Sent: Monday, March 27, 2006 7:44 PM
  To: L-FORWARDLOOK@xxxxxxxxxxxxx
  Subject: Re: [FWDLK] 1961 Plodge story

  =20

  I have heard of that car and as of yet I still have not got the whole =
story on it.Does anyone know if it real or just someone's =
creation?Thanks all.Jack in Michigan


  *************************************************************

  To unsubscribe or set your subscription options, please go to=20
  http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1=20


  *************************************************************

  To unsubscribe or set your subscription options, please go to=20
  http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1=20

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1

------=_NextPart_000_003F_01C6532B.996CA090
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML xmlns=3D"http://www.w3.org/TR/REC-html40"; xmlns:v =3D=20
"urn:schemas-microsoft-com:vml" xmlns:o =3D=20
"urn:schemas-microsoft-com:office:office" xmlns:w =3D=20
"urn:schemas-microsoft-com:office:word" xmlns:st1 =3D=20
"urn:schemas-microsoft-com:office:smarttags"><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2900.2802" name=3DGENERATOR><!--[if !mso]>
<STYLE>v\:* {
	BEHAVIOR: url(#default#VML)
}
o\:* {
	BEHAVIOR: url(#default#VML)
}
w\:* {
	BEHAVIOR: url(#default#VML)
}
.shape {
	BEHAVIOR: url(#default#VML)
}
</STYLE>
<![endif]--><o:SmartTagType name=3D"country-region"=20
namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags"></o:SmartTagT=
ype><o:SmartTagType=20
name=3D"City"=20
namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags"></o:SmartTagT=
ype><o:SmartTagType=20
name=3D"State"=20
namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags"></o:SmartTagT=
ype><o:SmartTagType=20
name=3D"place"=20
namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags"></o:SmartTagT=
ype><o:SmartTagType=20
name=3D"PersonName"=20
namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags"></o:SmartTagT=
ype><!--[if !mso]>
<STYLE>
st1\:*{behavior:url(#default#ieooui) }
</STYLE>
<![endif]-->
<STYLE>
<!--
 /* Font Definitions */
 @font-face
	{font-family:Tahoma;
	panose-1:2 11 6 4 3 5 4 4 2 4;}
 /* Style Definitions */
 p.MsoNormal, li.MsoNormal, div.MsoNormal
	{margin:0cm;
	margin-bottom:.0001pt;
	font-size:12.0pt;
	font-family:"Times New Roman";}
a:link, span.MsoHyperlink
	{color:blue;
	text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
	{color:purple;
	text-decoration:underline;}
span.emailstyle17
	{font-family:Arial;
	color:navy;}
span.E-mailStijl18
	{mso-style-type:personal-reply;
	font-family:Arial;
	color:navy;}
@page Section1
	{size:612.0pt 792.0pt;
	margin:72.0pt 90.0pt 72.0pt 90.0pt;}
div.Section1
	{page:Section1;}
-->
</STYLE>
<!--[if gte mso 9]><xml>
 <o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
 <o:shapelayout v:ext=3D"edit">
  <o:idmap v:ext=3D"edit" data=3D"1" />
 </o:shapelayout></xml><![endif]--></HEAD>
<BODY lang=3DNL id=3Drole_body bottomMargin=3D7 vLink=3Dpurple =
link=3Dblue bgColor=3D#ffffff=20
leftMargin=3D7 topMargin=3D7 rightMargin=3D7>
<DIV><FONT size=3D4>Thanks, Jim, for finally putting up a link that I =
could=20
use.? I was wondering what all the fuss was about, and now I =
know.?=20
</FONT></DIV>
<DIV><FONT size=3D4>Ya' know, in my opinion, neither the '61 Plymouths =
or Dodges=20
were particularly "handsome."? But it looks like this guy has taken =
the=20
best from both.? I LIKE IT!? And I especially like the color=20
too!</FONT></DIV>
<DIV><FONT size=3D4>/s/? Bill</FONT></DIV>
<DIV><FONT size=3D4>Concord, CA</FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
  <DIV style=3D"FONT: 10pt arial">----- Original Message ----- </DIV>
  <DIV=20
  style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>=20
  <A title=3DJim.Hoekendijk@xxxxxx =
href=3D"mailto:Jim.Hoekendijk@xxxxxx";>Jim=20
  Hoekendijk</A> </DIV>
  <DIV style=3D"FONT: 10pt arial"><B>To:</B> <A =
title=3DL-FORWARDLOOK@xxxxxxxxxxxxx=20
  =
href=3D"mailto:L-FORWARDLOOK@xxxxxxxxxxxxx";>L-FORWARDLOOK@xxxxxxxxxxxxx</=
A>=20
  </DIV>
  <DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Tuesday, March 28, 2006 =
5:21=20
  PM</DIV>
  <DIV style=3D"FONT: 10pt arial"><B>Subject:</B> Re: [FWDLK] 1961 =
Plodge=20
  story</DIV>
  <DIV><BR></DIV>
  <DIV class=3DSection1>
  <P class=3DMsoNormal><FONT face=3DArial color=3Dnavy size=3D2><SPAN =
lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Thanks=20
  Tony,<o:p></o:p></SPAN></FONT></P>
  <P class=3DMsoNormal><FONT face=3DArial color=3Dnavy size=3D2><SPAN =
lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">The link =
you provided=20
  didn=92t work with me.<o:p></o:p></SPAN></FONT></P>
  <P class=3DMsoNormal><FONT face=3DArial color=3Dnavy size=3D2><SPAN =
lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">In case it =
doesn=92t=20
  work with others either:<o:p></o:p></SPAN></FONT></P>
  <P class=3DMsoNormal><FONT face=3DArial color=3Dnavy size=3D2><SPAN =
lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"><A=20
  =
href=3D"http://clubs.hemmings.com/clubsites/lambdacarclub/Gallery/PaulG/1=
PaulGFrame.html">http://clubs.hemmings.com/clubsites/lambdacarclub/Galler=
y/PaulG/1PaulGFrame.html</A><o:p></o:p></SPAN></FONT></P>
  <P class=3DMsoNormal><FONT face=3DArial color=3Dnavy size=3D2><SPAN =
lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: =
Arial"><o:p>?</o:p></SPAN></FONT></P>
  <P class=3DMsoNormal><st1:PersonName w:st=3D"on" ProductID=3D"Jim =
Hoekendijk"><FONT=20
  face=3DArial color=3Dnavy size=3D2><SPAN lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Jim=20
  Hoekendijk</SPAN></FONT></st1:PersonName><FONT face=3DArial =
color=3Dnavy=20
  size=3D2><SPAN lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: =
Arial"><o:p></o:p></SPAN></FONT></P>
  <P class=3DMsoNormal><FONT face=3DArial color=3Dnavy size=3D2><SPAN =
lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">The=20
  <st1:country-region w:st=3D"on"><st1:place=20
  =
w:st=3D"on">Netherlands</st1:place></st1:country-region><o:p></o:p></SPAN=
></FONT></P>
  <P class=3DMsoNormal><FONT face=3DArial color=3Dnavy size=3D2><SPAN =
lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">=9257 Dodge =

  D500<o:p></o:p></SPAN></FONT></P>
  <P class=3DMsoNormal><FONT face=3DArial color=3Dnavy size=3D2><SPAN =
lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: =
Arial"><o:p>?</o:p></SPAN></FONT></P>
  <DIV>
  <DIV style=3D"MARGIN-LEFT: 35.4pt">
  <DIV class=3DMsoNormal style=3D"TEXT-ALIGN: center" =
align=3Dcenter><FONT=20
  face=3D"Times New Roman" size=3D3><SPAN style=3D"FONT-SIZE: 12pt">
  <HR tabIndex=3D-1 align=3Dcenter width=3D"100%" SIZE=3D2>
  </SPAN></FONT></DIV></DIV>
  <P class=3DMsoNormal style=3D"MARGIN-LEFT: 35.4pt"><B><FONT =
face=3DTahoma=20
  size=3D2><SPAN=20
  style=3D"FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: =
Tahoma">Van:</SPAN></FONT></B><FONT=20
  face=3DTahoma size=3D2><SPAN style=3D"FONT-SIZE: 10pt; FONT-FAMILY: =
Tahoma"> Forward=20
  Look Mopar Discussion List [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] =
<B><SPAN=20
  style=3D"FONT-WEIGHT: bold">Namens </SPAN></B><st1:PersonName =
w:st=3D"on"=20
  ProductID=3D"Tony Boatman">Tony Boatman</st1:PersonName><BR><B><SPAN=20
  style=3D"FONT-WEIGHT: bold">Verzonden:</SPAN></B> dinsdag 28 maart =
2006=20
  18:32<BR><B><SPAN style=3D"FONT-WEIGHT: bold">Aan:</SPAN></B>=20
  L-FORWARDLOOK@xxxxxxxxxxxxx<BR><B><SPAN=20
  style=3D"FONT-WEIGHT: bold">Onderwerp:</SPAN></B> Re: [FWDLK] 1961 =
Plodge=20
  story</SPAN></FONT><o:p></o:p></P></DIV>
  <P class=3DMsoNormal style=3D"MARGIN-LEFT: 35.4pt"><FONT face=3D"Times =
New Roman"=20
  size=3D3><SPAN style=3D"FONT-SIZE: =
12pt"><o:p>?</o:p></SPAN></FONT></P>
  <P class=3DMsoNormal style=3D"MARGIN-LEFT: 35.4pt"><FONT face=3DArial =
color=3Dnavy=20
  size=3D2><SPAN lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">This beast =
was=20
  discussed about a year ago, and the prevailing feeling was that it was =
a=20
  Frankenstein=92s monster created by a guy in <st1:State =
w:st=3D"on"><st1:place=20
  w:st=3D"on">Michigan</st1:place></st1:State> who was either dishonest =
or just=20
  had a wild sense of humor.? You can find pictures of it on <A=20
  href=3D"http://www.lambdacarclub.org/";>www.lambdacarclub.com</A> then =
clicking=20
  on =93Gallery=94 then =93Member=94 and scrolling down until you see =
=93Paul G=92s=94=20
  car.? That=92s it. </SPAN></FONT><SPAN =
lang=3DEN-US><o:p></o:p></SPAN></P>
  <P class=3DMsoNormal style=3D"MARGIN-LEFT: 35.4pt"><FONT face=3DArial =
color=3Dnavy=20
  size=3D2><SPAN lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: =
Arial">?</SPAN></FONT><SPAN=20
  lang=3DEN-US><o:p></o:p></SPAN></P>
  <P class=3DMsoNormal style=3D"MARGIN-LEFT: 35.4pt"><st1:PersonName =
w:st=3D"on"=20
  ProductID=3D"Tony Boatman"><FONT face=3DArial color=3Dnavy =
size=3D2><SPAN lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Tony=20
  Boatman</SPAN></FONT></st1:PersonName><SPAN =
lang=3DEN-US><o:p></o:p></SPAN></P>
  <P class=3DMsoNormal style=3D"MARGIN-LEFT: 35.4pt"><st1:place =
w:st=3D"on"><st1:City=20
  w:st=3D"on"><FONT face=3DArial color=3Dnavy size=3D2><SPAN =
lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: =
Arial">Boise</SPAN></FONT></st1:City><FONT=20
  face=3DArial color=3Dnavy size=3D2><SPAN lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">, =
<st1:State=20
  w:st=3D"on">Idaho</st1:State></SPAN></FONT></st1:place><SPAN=20
  lang=3DEN-US><o:p></o:p></SPAN></P>
  <P class=3DMsoNormal style=3D"MARGIN-LEFT: 35.4pt"><FONT face=3DArial =
color=3Dnavy=20
  size=3D2><SPAN lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">57 Dodge=20
  CRL</SPAN></FONT><SPAN lang=3DEN-US><o:p></o:p></SPAN></P>
  <P class=3DMsoNormal style=3D"MARGIN-LEFT: 35.4pt"><FONT face=3DArial =
color=3Dnavy=20
  size=3D2><SPAN lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">69 =
Barracuda=20
  convertible</SPAN></FONT><SPAN lang=3DEN-US><o:p></o:p></SPAN></P>
  <P class=3DMsoNormal style=3D"MARGIN-LEFT: 35.4pt"><FONT face=3DArial =
color=3Dnavy=20
  size=3D2><SPAN lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: =
Arial">?</SPAN></FONT><SPAN=20
  lang=3DEN-US><o:p></o:p></SPAN></P>
  <P class=3DMsoNormal style=3D"MARGIN-LEFT: 71.4pt"><FONT face=3DTahoma =
size=3D2><SPAN=20
  lang=3DEN-US style=3D"FONT-SIZE: 10pt; FONT-FAMILY: =
Tahoma">-----Original=20
  Message-----<BR><B><SPAN style=3D"FONT-WEIGHT: bold">From:</SPAN></B> =
Forward=20
  Look Mopar Discussion List [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] =
<B><SPAN=20
  style=3D"FONT-WEIGHT: bold">On Behalf Of </SPAN></B>Jackie =
Wrinkles<BR><B><SPAN=20
  style=3D"FONT-WEIGHT: bold">Sent:</SPAN></B> Monday, March 27, 2006 =
7:44=20
  PM<BR><B><SPAN style=3D"FONT-WEIGHT: bold">To:</SPAN></B>=20
  L-FORWARDLOOK@xxxxxxxxxxxxx<BR><B><SPAN=20
  style=3D"FONT-WEIGHT: bold">Subject:</SPAN></B> Re: [FWDLK] 1961 =
Plodge=20
  story</SPAN></FONT><SPAN lang=3DEN-US><o:p></o:p></SPAN></P>
  <P class=3DMsoNormal style=3D"MARGIN-LEFT: 71.4pt"><FONT face=3D"Times =
New Roman"=20
  size=3D3><SPAN lang=3DEN-US=20
  style=3D"FONT-SIZE: 12pt">?<o:p></o:p></SPAN></FONT></P>
  <DIV>
  <P class=3DMsoNormal style=3D"MARGIN-LEFT: 71.4pt"><FONT face=3DArial =
color=3Dblack=20
  size=3D2><SPAN lang=3DEN-US=20
  style=3D"FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">I have =
heard of that=20
  car and as of yet I still have not got the whole story on it.Does =
anyone know=20
  if it real or just someone's creation?Thanks all.Jack in <st1:State=20
  w:st=3D"on"><st1:place=20
  w:st=3D"on">Michigan</st1:place></st1:State></SPAN></FONT><SPAN=20
  lang=3DEN-US><o:p></o:p></SPAN></P></DIV></DIV>
  <P><FONT face=3DArial size=3D2></FONT></P>
  <P><FONT face=3DArial=20
  =
size=3D2>*************************************************************</F=
ONT></P>
  <P><FONT face=3DArial size=3D2>To unsubscribe or set your subscription =
options,=20
  please go to <BR><A=20
  =
href=3D"http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1"=
>http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1</A>=20
  </FONT></P>
  <P><FONT face=3DArial size=3D2></FONT></P>
  <P><FONT face=3DArial=20
  =
size=3D2>*************************************************************</F=
ONT></P>
  <P><FONT face=3DArial size=3D2>To unsubscribe or set your subscription =
options,=20
  please go to <BR><A=20
  =
href=3D"http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1"=
>http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1</A>=20
  </FONT></P></BLOCKQUOTE></BODY></HTML>
<p><font face=3D"Arial" size=3D"2"></font></p>
<p><font face=3D"Arial" size=3D"2">
*************************************************************</font></p>
<p><font face=3D"Arial" size=3D"2">To unsubscribe or set your subscription
options,
please go to <br>
<a href=3D"http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1";>
http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1</a> </font></p>

------=_NextPart_000_003F_01C6532B.996CA090--

------------------------------

Date:    Wed, 29 Mar 2006 18:12:20 -0500
From:    Ron Waters <ronbo97@xxxxxxxxxxx>
Subject: Carpet Problems

Hey Everyone -

Finally had a chance today to measure out the carpet that I bought from Auto
Custom Carpets (actually one of their affiliates). I chose them based on
positive feedback from the list. The results were disappointing. Carpet is
about 6 or 8 inches too wide. But worse, it doesn't seem to be correct for
my 58 Plymouth: there is a 2' long horizontal opening in the center heading
off to the right of the front piece. Anyone know what that is for ? The heel
pad is totally wrong and seems to be too far down to be of any good. Rear
piece is also too wide. Is the carpet supposed to go under the rear seat ?
No installation instructions provided. Grrrrrrr !

If anyone else on the list has dealt with them, have they had similar
problems ? Any suggestions ? I plan on calling the company tomorrow (their
tech support people only work until 2pm !). Box did say 58 Plymouth 2dr HT
on it.

Ron

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

------------------------------

Date:    Wed, 29 Mar 2006 19:37:21 -0500
From:    "John J. Hertog" <crossram@xxxxxxxxxxxxx>
Subject: Carpet Problems

Hi Ron, 

I have no idea what the opening is in your carpet - sounds strange, a defect
maybe? It is normal that the carpet sections are wider than the original -
it does have to be trimmed to fit. As far as heel pad, yes, it is not quite
as the original, it's a generic pad.  Only Legendary carpets have the right
heel pad, as far as I know. 

Installation instructions?  Get out the razor blade / carpet knife and go.
Start with the rear piece. Center it well. Trim it out as required. Make
damn sure you press down hard in the footwell areas / sill areas before
doing the final trimming.  Then repeat with front carpet.  Not only do you
need to center it well, you also need to deal with the forward edge of it
being as far forward as possible, and trimmed out as required, before
worrying about the rest. 

Most important "trick" is to press down hard in the footwell areas and make
sure carpet conforms to floor pan, before making final cuts at left and
right sides. If not, the first time someone puts their feet down, the carpet
will be pulled out from under the sill plates / kick plates.   I use a
rubber mallet and beat the crap out of the the carpet where it needs to
"bend" more.  I also leave a couple extra inches at the side edges, and only
make the final cut after I am SURE it's right. 

As with everything else, take your time. Always work from the center, out. 

Just installed an ACC made carpet in my '61 Newport. Had no problems. Just
took a few hours. 

John Hertog
Sag Harbor NY      




-----Original Message-----
From: Forward Look Mopar Discussion List
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of Ron Waters
Sent: Wednesday, March 29, 2006 6:12 PM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] Carpet Problems

Hey Everyone -

Finally had a chance today to measure out the carpet that I bought from Auto
Custom Carpets (actually one of their affiliates). I chose them based on
positive feedback from the list. The results were disappointing. Carpet is
about 6 or 8 inches too wide. But worse, it doesn't seem to be correct for
my 58 Plymouth: there is a 2' long horizontal opening in the center heading
off to the right of the front piece. Anyone know what that is for ? The heel
pad is totally wrong and seems to be too far down to be of any good. Rear
piece is also too wide. Is the carpet supposed to go under the rear seat ?
No installation instructions provided. Grrrrrrr !

If anyone else on the list has dealt with them, have they had similar
problems ? Any suggestions ? I plan on calling the company tomorrow (their
tech support people only work until 2pm !). Box did say 58 Plymouth 2dr HT
on it.

Ron

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

------------------------------

Date:    Wed, 29 Mar 2006 20:07:42 -0800
From:    Ron Waters <ronbo97@xxxxxxxxxxx>
Subject: Re: Carpet Problems

Thanks John. Sounds like you've been down this road a few times.

The 24" narrow hole is probably not a defect, since it's bound. Given that
the edges are bound, I figured that it would be a perfect fit. Otherwise, if
you cut it, you are loosing the advantage of the binding. Methinks that they
sent an incorrect piece.

Ron


----- Original Message ----- 
From: "John J. Hertog" <crossram@xxxxxxxxxxxxx>
To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Wednesday, March 29, 2006 4:37 PM
Subject: [FWDLK] Carpet Problems


> Hi Ron,
>
> I have no idea what the opening is in your carpet - sounds strange, a
defect
> maybe? It is normal that the carpet sections are wider than the original -
> it does have to be trimmed to fit. As far as heel pad, yes, it is not
quite
> as the original, it's a generic pad.  Only Legendary carpets have the
right
> heel pad, as far as I know.
>
> Installation instructions?  Get out the razor blade / carpet knife and go.
> Start with the rear piece. Center it well. Trim it out as required. Make
> damn sure you press down hard in the footwell areas / sill areas before
> doing the final trimming.  Then repeat with front carpet.  Not only do you
> need to center it well, you also need to deal with the forward edge of it
> being as far forward as possible, and trimmed out as required, before
> worrying about the rest.
>
> Most important "trick" is to press down hard in the footwell areas and
make
> sure carpet conforms to floor pan, before making final cuts at left and
> right sides. If not, the first time someone puts their feet down, the
carpet
> will be pulled out from under the sill plates / kick plates.   I use a
> rubber mallet and beat the crap out of the the carpet where it needs to
> "bend" more.  I also leave a couple extra inches at the side edges, and
only
> make the final cut after I am SURE it's right.
>
> As with everything else, take your time. Always work from the center, out.
>
> Just installed an ACC made carpet in my '61 Newport. Had no problems. Just
> took a few hours.
>
> John Hertog
> Sag Harbor NY
>
>
>
>
> -----Original Message-----
> From: Forward Look Mopar Discussion List
> [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of Ron Waters
> Sent: Wednesday, March 29, 2006 6:12 PM
> To: L-FORWARDLOOK@xxxxxxxxxxxxx
> Subject: [FWDLK] Carpet Problems
>
> Hey Everyone -
>
> Finally had a chance today to measure out the carpet that I bought from
Auto
> Custom Carpets (actually one of their affiliates). I chose them based on
> positive feedback from the list. The results were disappointing. Carpet is
> about 6 or 8 inches too wide. But worse, it doesn't seem to be correct for
> my 58 Plymouth: there is a 2' long horizontal opening in the center
heading
> off to the right of the front piece. Anyone know what that is for ? The
heel
> pad is totally wrong and seems to be too far down to be of any good. Rear
> piece is also too wide. Is the carpet supposed to go under the rear seat ?
> No installation instructions provided. Grrrrrrr !
>
> If anyone else on the list has dealt with them, have they had similar
> problems ? Any suggestions ? I plan on calling the company tomorrow (their
> tech support people only work until 2pm !). Box did say 58 Plymouth 2dr HT
> on it.
>
> Ron
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

------------------------------

Date:    Wed, 29 Mar 2006 19:19:19 -0600
From:    debenson2 <debensonii@xxxxxxxxxxx>
Subject: Re: Carpet Problems

This is a multi-part message in MIME format.

------=_NextPart_000_002A_01C65365.AD991190
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Older Lincolns 1950 1951 had a flap in the carpet on the trans hump and =
that was the place you added and checked the trans fluid.
I also think they may have sent out mislabeled carpet,,,,BUT do not cut =
it in anyway and they should exchange it.
debenson2
Road2Recovery
Box 43873
Brooklyn Park, Minnesota 55443 USA
----- Original Message -----=20
  From: John J. Hertog=20
  To: L-FORWARDLOOK@xxxxxxxxxxxxx=20
  Sent: Wednesday, March 29, 2006 6:37 PM
  Subject: [FWDLK] Carpet Problems


  Hi Ron,=20

  I have no idea what the opening is in your carpet - sounds strange, a =
defect
  maybe? It is normal that the carpet sections are wider than the =
original -
  it does have to be trimmed to fit. As far as heel pad, yes, it is not =
quite
  as the original, it's a generic pad.  Only Legendary carpets have the =
right
  heel pad, as far as I know.=20

  Installation instructions?  Get out the razor blade / carpet knife and =
go.
  Start with the rear piece. Center it well. Trim it out as required. =
Make
  damn sure you press down hard in the footwell areas / sill areas =
before
  doing the final trimming.  Then repeat with front carpet.  Not only do =
you
  need to center it well, you also need to deal with the forward edge of =
it
  being as far forward as possible, and trimmed out as required, before
  worrying about the rest.=20

  Most important "trick" is to press down hard in the footwell areas and =
make
  sure carpet conforms to floor pan, before making final cuts at left =
and
  right sides. If not, the first time someone puts their feet down, the =
carpet
  will be pulled out from under the sill plates / kick plates.   I use a
  rubber mallet and beat the crap out of the the carpet where it needs =
to
  "bend" more.  I also leave a couple extra inches at the side edges, =
and only
  make the final cut after I am SURE it's right.=20

  As with everything else, take your time. Always work from the center, =
out.=20

  Just installed an ACC made carpet in my '61 Newport. Had no problems. =
Just
  took a few hours.=20

  John Hertog
  Sag Harbor NY     =20




  -----Original Message-----
  From: Forward Look Mopar Discussion List
  [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of Ron Waters
  Sent: Wednesday, March 29, 2006 6:12 PM
  To: L-FORWARDLOOK@xxxxxxxxxxxxx
  Subject: [FWDLK] Carpet Problems

  Hey Everyone -

  Finally had a chance today to measure out the carpet that I bought =
from Auto
  Custom Carpets (actually one of their affiliates). I chose them based =
on
  positive feedback from the list. The results were disappointing. =
Carpet is
  about 6 or 8 inches too wide. But worse, it doesn't seem to be correct =
for
  my 58 Plymouth: there is a 2' long horizontal opening in the center =
heading
  off to the right of the front piece. Anyone know what that is for ? =
The heel
  pad is totally wrong and seems to be too far down to be of any good. =
Rear
  piece is also too wide. Is the carpet supposed to go under the rear =
seat ?
  No installation instructions provided. Grrrrrrr !

  If anyone else on the list has dealt with them, have they had similar
  problems ? Any suggestions ? I plan on calling the company tomorrow =
(their
  tech support people only work until 2pm !). Box did say 58 Plymouth =
2dr HT
  on it.

  Ron

  *************************************************************

  To unsubscribe or set your subscription options, please go to
  http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1

  *************************************************************

  To unsubscribe or set your subscription options, please go to
  http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1

------=_NextPart_000_002A_01C65365.AD991190
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2900.2802" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D5>Older Lincolns 1950 1951 had a flap in =
the=20
carpet?on the trans hump and that was the place you added and =
checked the=20
trans fluid.</FONT></DIV>
<DIV><FONT face=3DArial size=3D5>I also think they may have sent =
out?mislabeled=20
carpet,,,,BUT do not cut it in anyway and they should exchange =
it.</FONT></DIV>
<DIV>debenson2<BR>Road2Recovery<BR>Box 43873<BR>Brooklyn Park, Minnesota =
55443=20
USA<BR>----- Original Message ----- </DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
  <DIV=20
  style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>=20
  <A title=3Dcrossram@xxxxxxxxxxxxx =
href=3D"mailto:crossram@xxxxxxxxxxxxx";>John J.=20
  Hertog</A> </DIV>
  <DIV style=3D"FONT: 10pt arial"><B>To:</B> <A =
title=3DL-FORWARDLOOK@xxxxxxxxxxxxx=20
  =
href=3D"mailto:L-FORWARDLOOK@xxxxxxxxxxxxx";>L-FORWARDLOOK@xxxxxxxxxxxxx</=
A>=20
  </DIV>
  <DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Wednesday, March 29, 2006 =
6:37=20
  PM</DIV>
  <DIV style=3D"FONT: 10pt arial"><B>Subject:</B> [FWDLK] Carpet =
Problems</DIV>
  <DIV><BR></DIV>Hi Ron, <BR><BR>I have no idea what the opening is in =
your=20
  carpet - sounds strange, a defect<BR>maybe? It is normal that the =
carpet=20
  sections are wider than the original -<BR>it does have to be trimmed =
to fit.=20
  As far as heel pad, yes, it is not quite<BR>as the original, it's a =
generic=20
  pad.? Only Legendary carpets have the right<BR>heel pad, as far =
as I=20
  know. <BR><BR>Installation instructions?? Get out the razor blade =
/=20
  carpet knife and go.<BR>Start with the rear piece. Center it well. =
Trim it out=20
  as required. Make<BR>damn sure you press down hard in the footwell =
areas /=20
  sill areas before<BR>doing the final trimming.? Then repeat with =
front=20
  carpet.? Not only do you<BR>need to center it well, you also need =
to deal=20
  with the forward edge of it<BR>being as far forward as possible, and =
trimmed=20
  out as required, before<BR>worrying about the rest. <BR><BR>Most =
important=20
  "trick" is to press down hard in the footwell areas and make<BR>sure =
carpet=20
  conforms to floor pan, before making final cuts at left and<BR>right =
sides. If=20
  not, the first time someone puts their feet down, the carpet<BR>will =
be pulled=20
  out from under the sill plates / kick plates.?? I use =
a<BR>rubber=20
  mallet and beat the crap out of the the carpet where it needs =
to<BR>"bend"=20
  more.? I also leave a couple extra inches at the side edges, and=20
  only<BR>make the final cut after I am SURE it's right. <BR><BR>As with =

  everything else, take your time. Always work from the center, out.=20
  <BR><BR>Just installed an ACC made carpet in my '61 Newport. Had no =
problems.=20
  Just<BR>took a few hours. <BR><BR>John Hertog<BR>Sag Harbor=20
  NY????? <BR><BR><BR><BR><BR>-----Original=20
  Message-----<BR>From: Forward Look Mopar Discussion=20
  List<BR>[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of Ron =
Waters<BR>Sent:=20
  Wednesday, March 29, 2006 6:12 PM<BR>To: <A=20
  =
href=3D"mailto:L-FORWARDLOOK@xxxxxxxxxxxxx";>L-FORWARDLOOK@xxxxxxxxxxxxx</=
A><BR>Subject:=20
  [FWDLK] Carpet Problems<BR><BR>Hey Everyone -<BR><BR>Finally had a =
chance=20
  today to measure out the carpet that I bought from Auto<BR>Custom =
Carpets=20
  (actually one of their affiliates). I chose them based on<BR>positive =
feedback=20
  from the list. The results were disappointing. Carpet is<BR>about 6 or =
8=20
  inches too wide. But worse, it doesn't seem to be correct for<BR>my 58 =

  Plymouth: there is a 2' long horizontal opening in the center =
heading<BR>off=20
  to the right of the front piece. Anyone know what that is for ? The=20
  heel<BR>pad is totally wrong and seems to be too far down to be of any =
good.=20
  Rear<BR>piece is also too wide. Is the carpet supposed to go under the =
rear=20
  seat ?<BR>No installation instructions provided. Grrrrrrr !<BR><BR>If =
anyone=20
  else on the list has dealt with them, have they had =
similar<BR>problems ? Any=20
  suggestions ? I plan on calling the company tomorrow (their<BR>tech =
support=20
  people only work until 2pm !). Box did say 58 Plymouth 2dr HT<BR>on=20
  =
it.<BR><BR>Ron<BR><BR>***************************************************=
**********<BR><BR>To=20
  unsubscribe or set your subscription options, please go to<BR><A=20
  =
href=3D"http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1"=
>http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1</A><BR>=
<BR>*************************************************************<BR><BR>=
To=20
  unsubscribe or set your subscription options, please go to<BR><A=20
  =
href=3D"http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1"=
>http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1</A><BR>=
</BLOCKQUOTE></BODY></HTML>
<p><font face=3D"Arial" size=3D"2"></font></p>
<p><font face=3D"Arial" size=3D"2">
*************************************************************</font></p>
<p><font face=3D"Arial" size=3D"2">To unsubscribe or set your subscription
options,
please go to <br>
<a href=3D"http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1";>
http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1</a> </font></p>

------=_NextPart_000_002A_01C65365.AD991190--

------------------------------

Date:    Wed, 29 Mar 2006 18:47:47 -0800
From:    Jan & Roger van Hoy <vanhilla@xxxxxxxxxxxx>
Subject: Re: 1961 Plodge story

This is a multi-part message in MIME format.

------=_NextPart_000_0071_01C65361.45F6C090
Content-Type: text/plain;
	charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable

Yeah, I wrote the mag and suggested they contact the editor of Hemmings =
Classic Cars for the real story...

--Roger van Hoy, Washougal, WA, '55 DeSoto, '58 DeSoto, '42 DeSoto, '56 =
Plymouth, '66 Plymouth, '41 Dodge
  ----- Original Message -----=20
  From: Jim Krausmann=20
  To: L-FORWARDLOOK@xxxxxxxxxxxxx=20
  Sent: Wednesday, March 29, 2006 7:06 AM
  Subject: Re: [FWDLK] 1961 Plodge story


  Did anyone let the magazine people know about the real history of the =
car?

  Jim

    -------------- Original message --------------=20
    From: Ron Waters <ronbo97@xxxxxxxxxxx>=20

    "many of them were sent back to the factory and destroyed, as they =
were considered too ugly to sell. "

    I wonder where PaulG gets his 'facts'. I guess if he can fabricate =
cars, he can also fabricate myths.

    Ron
      ----- Original Message -----=20
      From: Jim Hoekendijk=20
      To: L-FORWARDLOOK@xxxxxxxxxxxxx=20
      Sent: Tuesday, March 28, 2006 8:21 PM
      Subject: Re: [FWDLK] 1961 Plodge story


      Thanks Tony,

      The link you provided didn=92t work with me.

      In case it doesn=92t work with others either:

      =
http://clubs.hemmings.com/clubsites/lambdacarclub/Gallery/PaulG/1PaulGFra=
me.html

      =20

      Jim Hoekendijk

      The Netherlands

      =9257 Dodge D500

      =20


-------------------------------------------------------------------------=
-

      Van: Forward Look Mopar Discussion List =
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] Namens Tony Boatman
      Verzonden: dinsdag 28 maart 2006 18:32
      Aan: L-FORWARDLOOK@xxxxxxxxxxxxx
      Onderwerp: Re: [FWDLK] 1961 Plodge story

      =20

      This beast was discussed about a year ago, and the prevailing =
feeling was that it was a Frankenstein=92s monster created by a guy in =
Michigan who was either dishonest or just had a wild sense of humor.  =
You can find pictures of it on www.lambdacarclub.com then clicking on =
=93Gallery=94 then =93Member=94 and scrolling down until you see =93Paul =
G=92s=94 car.  That=92s it.=20

      =20

      Tony Boatman

      Boise, Idaho

      57 Dodge CRL

      69 Barracuda convertible

      =20

      -----Original Message-----
      From: Forward Look Mopar Discussion List =
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of Jackie Wrinkles
      Sent: Monday, March 27, 2006 7:44 PM
      To: L-FORWARDLOOK@xxxxxxxxxxxxx
      Subject: Re: [FWDLK] 1961 Plodge story

      =20

      I have heard of that car and as of yet I still have not got the =
whole story on it.Does anyone know if it real or just someone's =
creation?Thanks all.Jack in Michigan


      *************************************************************

      To unsubscribe or set your subscription options, please go to=20
      http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1=20


      *************************************************************

      To unsubscribe or set your subscription options, please go to=20
      http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1=20


    *************************************************************

    To unsubscribe or set your subscription options, please go to=20
    http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1=20


  *************************************************************

  To unsubscribe or set your subscription options, please go to=20
  http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1=20

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1

------=_NextPart_000_0071_01C65361.45F6C090
Content-Type: text/html;
	charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML xmlns:o =3D "urn:schemas-microsoft-com:office:office" xmlns:st1 =
=3D=20
"urn:schemas-microsoft-com:office:smarttags"><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Dwindows-1252">
<META content=3D"MSHTML 6.00.2900.2802" name=3DGENERATOR></HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT size=3D4>Yeah, I wrote the mag and suggested they contact the =
editor of=20
Hemmings Classic Cars for the real story...</FONT></DIV>
<DIV><FONT size=3D4></FONT>?</DIV>
<DIV><FONT size=3D4>--Roger van Hoy, Washougal, WA, '55 DeSoto, '58 =
DeSoto, '42=20
DeSoto, '56 Plymouth, '66 Plymouth, '41 Dodge</FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
  <DIV style=3D"FONT: 10pt arial">----- Original Message ----- </DIV>
  <DIV=20
  style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>=20
  <A title=3Dkraus300@xxxxxxxxxxx =
href=3D"mailto:kraus300@xxxxxxxxxxx";>Jim=20
  Krausmann</A> </DIV>
  <DIV style=3D"FONT: 10pt arial"><B>To:</B> <A =
title=3DL-FORWARDLOOK@xxxxxxxxxxxxx=20
  =
href=3D"mailto:L-FORWARDLOOK@xxxxxxxxxxxxx";>L-FORWARDLOOK@xxxxxxxxxxxxx</=
A>=20
  </DIV>
  <DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Wednesday, March 29, 2006 =
7:06=20
  AM</DIV>
  <DIV style=3D"FONT: 10pt arial"><B>Subject:</B> Re: [FWDLK] 1961 =
Plodge=20
  story</DIV>
  <DIV><BR></DIV>
  <DIV>Did anyone let the magazine people know about the real history of =
the=20
  car?</DIV>
  <DIV>?</DIV>
  <DIV>Jim</DIV>
  <DIV>?</DIV>
  <BLOCKQUOTE=20
  style=3D"PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px =
solid">--------------=20
    Original message -------------- <BR>From: Ron Waters <<A=20
    href=3D"mailto:ronbo97@xxxxxxxxxxx";>ronbo97@xxxxxxxxxxx</A>> <BR>
    <META content=3D"MSHTML 6.00.2800.1528" name=3DGENERATOR>
    <STYLE>v\:* {
	BEHAVIOR: url(#default#VML)
}
o\:* {
	BEHAVIOR: url(#default#VML)
}
w\:* {
	BEHAVIOR: url(#default#VML)
}
shape {
	BEHAVIOR: url(#default#VML)
}
</STYLE>
    <o:SmartTagType name=3D"country-region"=20
    =
namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags"></o:SmartTagT=
ype><o:SmartTagType=20
    name=3D"City"=20
    =
namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags"></o:SmartTagT=
ype><o:SmartTagType=20
    name=3D"State"=20
    =
namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags"></o:SmartTagT=
ype><o:SmartTagType=20
    name=3D"place"=20
    =
namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags"></o:SmartTagT=
ype><o:SmartTagType=20
    name=3D"PersonName"=20
    =
namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags"></o:SmartTagT=
ype>
    <STYLE>
st1\:*{behavior:url(#default#ieooui) }
</STYLE>

    <STYLE>
<!--
 /* Font Definitions */
 @font-face
	{font-family:Tahoma;
	panose-1:2 11 6 4 3 5 4 4 2 4;}
 /* Style Definitions */
 p.MsoNormal, li.MsoNormal, div.MsoNormal
	{margin:0cm;
	margin-bottom:.0001pt;
	font-size:12.0pt;
	font-family:"Times New Roman";}
a:link, span.MsoHyperlink
	{color:blue;
	text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
	{color:purple;
	text-decoration:underline;}
span.emailstyle17
	{font-family:Arial;
	color:navy;}
span.E-mailStijl18
	{mso-style-type:personal-reply;
	font-family:Arial;
	color:navy;}
@page Section1
	{size:612.0pt 792.0pt;
	margin:72.0pt 90.0pt 72.0pt 90.0pt;}
div.Section1
	{page:Section1;}
-->
</STYLE>

    <DIV><STRONG><FONT color=3D#000080 size=3D2>"many of them were sent =
back to the=20
    factory and destroyed, as they were considered too ugly to=20
    sell.?"</FONT></STRONG></DIV>
    <DIV><STRONG><FONT color=3D#000080 =
size=3D2></FONT></STRONG>?</DIV>
    <DIV><FONT size=3D2>I wonder where PaulG gets his 'facts'. I guess =
if he can=20
    fabricate cars, he can also fabricate myths.</FONT></DIV>
    <DIV><FONT size=3D2></FONT>?</DIV>
    <DIV><FONT size=3D2>Ron</FONT></DIV>
    <BLOCKQUOTE dir=3Dltr=20
    style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
      <DIV style=3D"FONT: 10pt arial">----- Original Message ----- =
</DIV>
      <DIV=20
      style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>=20
      <A title=3DJim.Hoekendijk@xxxxxx =
href=3D"mailto:Jim.Hoekendijk@xxxxxx";>Jim=20
      Hoekendijk</A> </DIV>
      <DIV style=3D"FONT: 10pt arial"><B>To:</B> <A=20
      title=3DL-FORWARDLOOK@xxxxxxxxxxxxx=20
      =
href=3D"mailto:L-FORWARDLOOK@xxxxxxxxxxxxx";>L-FORWARDLOOK@xxxxxxxxxxxxx</=
A>=20
      </DIV>
      <DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Tuesday, March 28, =
2006 8:21=20
      PM</DIV>
      <DIV style=3D"FONT: 10pt arial"><B>Subject:</B> Re: [FWDLK] 1961 =
Plodge=20
      story</DIV>
      <DIV><BR></DIV>
      <DIV class=3DSection1>
      <P class=3DMsoNormal><FONT face=3DArial color=3Dnavy =
size=3D2><SPAN lang=3DEN-US=20
      style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Thanks=20
      Tony,<o:p></o:p></SPAN></FONT></P>
      <P class=3DMsoNormal><FONT face=3DArial color=3Dnavy =
size=3D2><SPAN lang=3DEN-US=20
      style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">The =
link you=20
      provided didn=92t work with me.<o:p></o:p></SPAN></FONT></P>
      <P class=3DMsoNormal><FONT face=3DArial color=3Dnavy =
size=3D2><SPAN lang=3DEN-US=20
      style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">In case =
it=20
      doesn=92t work with others either:<o:p></o:p></SPAN></FONT></P>
      <P class=3DMsoNormal><FONT face=3DArial color=3Dnavy =
size=3D2><SPAN lang=3DEN-US=20
      style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"><A=20
      =
href=3D"http://clubs.hemmings.com/clubsites/lambdacarclub/Gallery/PaulG/1=
PaulGFrame.html">http://clubs.hemmings.com/clubsites/lambdacarclub/Galler=
y/PaulG/1PaulGFrame.html</A><o:p></o:p></SPAN></FONT></P>
      <P class=3DMsoNormal><FONT face=3DArial color=3Dnavy =
size=3D2><SPAN lang=3DEN-US=20
      style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: =
Arial"><o:p>?</o:p></SPAN></FONT></P>
      <P class=3DMsoNormal><st1:PersonName w:st=3D"on"=20
      ProductID=3D"Jim Hoekendijk"><FONT face=3DArial color=3Dnavy =
size=3D2><SPAN=20
      lang=3DEN-US style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: =
Arial">Jim=20
      Hoekendijk</SPAN></FONT></st1:PersonName><FONT face=3DArial =
color=3Dnavy=20
      size=3D2><SPAN lang=3DEN-US=20
      style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: =
Arial"><o:p></o:p></SPAN></FONT></P>
      <P class=3DMsoNormal><FONT face=3DArial color=3Dnavy =
size=3D2><SPAN lang=3DEN-US=20
      style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">The=20
      <st1:country-region w:st=3D"on"><st1:place=20
      =
w:st=3D"on">Netherlands</st1:place></st1:country-region><o:p></o:p></SPAN=
></FONT></P>
      <P class=3DMsoNormal><FONT face=3DArial color=3Dnavy =
size=3D2><SPAN lang=3DEN-US=20
      style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">=9257 =
Dodge=20
      D500<o:p></o:p></SPAN></FONT></P>
      <P class=3DMsoNormal><FONT face=3DArial color=3Dnavy =
size=3D2><SPAN lang=3DEN-US=20
      style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: =
Arial"><o:p>?</o:p></SPAN></FONT></P>
      <DIV>
      <DIV style=3D"MARGIN-LEFT: 35.4pt">
      <DIV class=3DMsoNormal style=3D"TEXT-ALIGN: center" =
align=3Dcenter><FONT=20
      face=3D"Times New Roman" size=3D3><SPAN style=3D"FONT-SIZE: 12pt">
      <HR tabIndex=3D-1 align=3Dcenter width=3D"100%" SIZE=3D2>
      </SPAN></FONT></DIV></DIV>
      <P class=3DMsoNormal style=3D"MARGIN-LEFT: 35.4pt"><B><FONT =
face=3DTahoma=20
      size=3D2><SPAN=20
      style=3D"FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: =
Tahoma">Van:</SPAN></FONT></B><FONT=20
      face=3DTahoma size=3D2><SPAN style=3D"FONT-SIZE: 10pt; =
FONT-FAMILY: Tahoma">=20
      Forward Look Mopar Discussion List =
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx]=20
      <B><SPAN style=3D"FONT-WEIGHT: bold">Namens =
</SPAN></B><st1:PersonName=20
      w:st=3D"on" ProductID=3D"Tony Boatman">Tony=20
      Boatman</st1:PersonName><BR><B><SPAN=20
      style=3D"FONT-WEIGHT: bold">Verzonden:</SPAN></B> dinsdag 28 maart =
2006=20
      18:32<BR><B><SPAN style=3D"FONT-WEIGHT: bold">Aan:</SPAN></B>=20
      L-FORWARDLOOK@xxxxxxxxxxxxx<BR><B><SPAN=20
      style=3D"FONT-WEIGHT: bold">Onderwerp:</SPAN></B> Re: [FWDLK] 1961 =
Plodge=20
      story</SPAN></FONT><o:p></o:p></P></DIV>
      <P class=3DMsoNormal style=3D"MARGIN-LEFT: 35.4pt"><FONT=20
      face=3D"Times New Roman" size=3D3><SPAN=20
      style=3D"FONT-SIZE: 12pt"><o:p>?</o:p></SPAN></FONT></P>
      <P class=3DMsoNormal style=3D"MARGIN-LEFT: 35.4pt"><FONT =
face=3DArial color=3Dnavy=20
      size=3D2><SPAN lang=3DEN-US=20
      style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">This =
beast was=20
      discussed about a year ago, and the prevailing feeling was that it =
was a=20
      Frankenstein=92s monster created by a guy in <st1:State =
w:st=3D"on"><st1:place=20
      w:st=3D"on">Michigan</st1:place></st1:State> who was either =
dishonest or=20
      just had a wild sense of humor.? You can find pictures of it =
on <A=20
      href=3D"http://www.lambdacarclub.org/";>www.lambdacarclub.com</A> =
then=20
      clicking on =93Gallery=94 then =93Member=94 and scrolling down =
until you see =93Paul=20
      G=92s=94 car.? That=92s it. </SPAN></FONT><SPAN=20
      lang=3DEN-US><o:p></o:p></SPAN></P>
      <P class=3DMsoNormal style=3D"MARGIN-LEFT: 35.4pt"><FONT =
face=3DArial color=3Dnavy=20
      size=3D2><SPAN lang=3DEN-US=20
      style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: =
Arial">?</SPAN></FONT><SPAN=20
      lang=3DEN-US><o:p></o:p></SPAN></P>
      <P class=3DMsoNormal style=3D"MARGIN-LEFT: 35.4pt"><st1:PersonName =
w:st=3D"on"=20
      ProductID=3D"Tony Boatman"><FONT face=3DArial color=3Dnavy =
size=3D2><SPAN=20
      lang=3DEN-US style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: =
Arial">Tony=20
      Boatman</SPAN></FONT></st1:PersonName><SPAN=20
      lang=3DEN-US><o:p></o:p></SPAN></P>
      <P class=3DMsoNormal style=3D"MARGIN-LEFT: 35.4pt"><st1:place=20
      w:st=3D"on"><st1:City w:st=3D"on"><FONT face=3DArial color=3Dnavy =
size=3D2><SPAN=20
      lang=3DEN-US=20
      style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: =
Arial">Boise</SPAN></FONT></st1:City><FONT=20
      face=3DArial color=3Dnavy size=3D2><SPAN lang=3DEN-US=20
      style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">, =
<st1:State=20
      w:st=3D"on">Idaho</st1:State></SPAN></FONT></st1:place><SPAN=20
      lang=3DEN-US><o:p></o:p></SPAN></P>
      <P class=3DMsoNormal style=3D"MARGIN-LEFT: 35.4pt"><FONT =
face=3DArial color=3Dnavy=20
      size=3D2><SPAN lang=3DEN-US=20
      style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">57 =
Dodge=20
      CRL</SPAN></FONT><SPAN lang=3DEN-US><o:p></o:p></SPAN></P>
      <P class=3DMsoNormal style=3D"MARGIN-LEFT: 35.4pt"><FONT =
face=3DArial color=3Dnavy=20
      size=3D2><SPAN lang=3DEN-US=20
      style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">69 =
Barracuda=20
      convertible</SPAN></FONT><SPAN lang=3DEN-US><o:p></o:p></SPAN></P>
      <P class=3DMsoNormal style=3D"MARGIN-LEFT: 35.4pt"><FONT =
face=3DArial color=3Dnavy=20
      size=3D2><SPAN lang=3DEN-US=20
      style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: =
Arial">?</SPAN></FONT><SPAN=20
      lang=3DEN-US><o:p></o:p></SPAN></P>
      <P class=3DMsoNormal style=3D"MARGIN-LEFT: 71.4pt"><FONT =
face=3DTahoma=20
      size=3D2><SPAN lang=3DEN-US=20
      style=3D"FONT-SIZE: 10pt; FONT-FAMILY: Tahoma">-----Original=20
      Message-----<BR><B><SPAN style=3D"FONT-WEIGHT: =
bold">From:</SPAN></B>=20
      Forward Look Mopar Discussion List =
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx]=20
      <B><SPAN style=3D"FONT-WEIGHT: bold">On Behalf Of =
</SPAN></B>Jackie=20
      Wrinkles<BR><B><SPAN style=3D"FONT-WEIGHT: bold">Sent:</SPAN></B> =
Monday,=20
      March 27, 2006 7:44 PM<BR><B><SPAN=20
      style=3D"FONT-WEIGHT: bold">To:</SPAN></B>=20
      L-FORWARDLOOK@xxxxxxxxxxxxx<BR><B><SPAN=20
      style=3D"FONT-WEIGHT: bold">Subject:</SPAN></B> Re: [FWDLK] 1961 =
Plodge=20
      story</SPAN></FONT><SPAN lang=3DEN-US><o:p></o:p></SPAN></P>
      <P class=3DMsoNormal style=3D"MARGIN-LEFT: 71.4pt"><FONT=20
      face=3D"Times New Roman" size=3D3><SPAN lang=3DEN-US=20
      style=3D"FONT-SIZE: 12pt">?<o:p></o:p></SPAN></FONT></P>
      <DIV>
      <P class=3DMsoNormal style=3D"MARGIN-LEFT: 71.4pt"><FONT =
face=3DArial=20
      color=3Dblack size=3D2><SPAN lang=3DEN-US=20
      style=3D"FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial">I have =
heard of=20
      that car and as of yet I still have not got the whole story on =
it.Does=20
      anyone know if it real or just someone's creation?Thanks all.Jack =
in=20
      <st1:State w:st=3D"on"><st1:place=20
      w:st=3D"on">Michigan</st1:place></st1:State></SPAN></FONT><SPAN=20
      lang=3DEN-US><o:p></o:p></SPAN></P></DIV></DIV>
      <P><FONT face=3DArial size=3D2></FONT></P>
      <P><FONT face=3DArial=20
      =
size=3D2>*************************************************************</F=
ONT></P>
      <P><FONT face=3DArial size=3D2>To unsubscribe or set your =
subscription=20
      options, please go to <BR><A=20
      =
href=3D"http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1"=
>http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1</A>=20
      </FONT></P>
      <P><FONT face=3DArial size=3D2></FONT></P>
      <P><FONT face=3DArial=20
      =
size=3D2>*************************************************************</F=
ONT></P>
      <P><FONT face=3DArial size=3D2>To unsubscribe or set your =
subscription=20
      options, please go to <BR><A=20
      =
href=3D"http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1"=
>http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1</A>=20
      </FONT></P></BLOCKQUOTE>
    <P><FONT face=3DArial size=3D2></FONT></P>
    <P><FONT face=3DArial=20
    =
size=3D2>*************************************************************</F=
ONT></P>
    <P><FONT face=3DArial size=3D2>To unsubscribe or set your =
subscription options,=20
    please go to <BR><A=20
    =
href=3D"http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1"=
>http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1</A>=20
    </FONT></P></BLOCKQUOTE>
  <P><FONT face=3DArial size=3D2></FONT></P>
  <P><FONT face=3DArial=20
  =
size=3D2>*************************************************************</F=
ONT></P>
  <P><FONT face=3DArial size=3D2>To unsubscribe or set your subscription =
options,=20
  please go to <BR><A=20
  =
href=3D"http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1"=
>http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1</A>=20
  </FONT></P></BLOCKQUOTE></BODY></HTML>
<p><font face=3D"Arial" size=3D"2"></font></p>
<p><font face=3D"Arial" size=3D"2">
*************************************************************</font></p>
<p><font face=3D"Arial" size=3D"2">To unsubscribe or set your subscription
options,
please go to <br>
<a href=3D"http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1";>
http://lists.psu.edu/cgi-bin/wa?SUBED1=3Dl-forwardlook&A=3D1</a> </font></p>

------=_NextPart_000_0071_01C65361.45F6C090--

------------------------------

End of L-FORWARDLOOK Digest - 28 Mar 2006 to 29 Mar 2006 (#2006-88)
*******************************************************************

--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.