Re: [FWDLK] Crankshaft pulley puller??

[Paul Holmgren <paulholm@xxxxxxxxxxxxx>]

Ray Jones wrote:
> THIS ITEM IS NOT WHAT YOU NEED. It's for pulling gears on shafts and 
> grabs the gear at the outer edge. If you did that to a Crankshaft 
> Pulley, you could pull off/move the Harmonic Balancer. The balancer is 
> attached with a rubber  mount and cam be pulled loose.
>
> You need a plate type puller that uses bolts thru slotted legs of a 
> plate. Bolts  go thru the slots into threaded  holes on the pulley 
> center and then you  apply pressure by turning the center big bolt 
> against the crank. Available at most parts  stores for $15 or so.
>
> Ray

IF you have an Auto-Zone in your area,  they 'rent' tools!

Pay Totally refunded deposit and use tool, when you return, deposit 
returned  = $0.oo  cost ( minus the drive time and gas $$ of cource )


--
Paul Holmgren
2 57 300-C's in Indy
Hoosier Corps L#6

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1