Re: [FWDLK] Heater Hose

[William Huff <whuff@xxxxxxxxxx>]

Ron,

I have replaced the heater hoses on my 58 DeSoto and just used standard
auto store hoses.  They fit just fine.  I believe I recall that
one is smaller than the other, the hose barbs going in the fire wall and
at the water pump will tell that story.

Bill Huff

At 11/12/200703:56 PM, Ron Waters wrote:
> So is standard heater hose the
> right stuff, size wise, for my 58 Ply ?
>
> Ron
>
>
>
>
> > Ron, if you are not going to be using date-coded MoPar heater hose,
> you
> > might consider installing
> > push-on hydraulic hose ; AKA: "power-steering" hose, as
> the latter is
> > considerably stronger, than the former
> > which is rated for no chemicals, harsher than that of
> anti-freeze.
> >
> > A problem definitely can occur when HEATER hose is mistakenly
> installed
> > on a P/S application!
> >
> > Neil Vedder
> >
> > Ron Waters wrote:
> > > Hi Everyone -
> > >
> > > I need to get some heater hose for my 58 Plymouth. Is standard
> heater
> hose
> > > the correct size, or is there a special size required ? Also,
> are both
> the
> > > outgoing and return hoses the same size ?
> > >
> > > Thanks,
> > >
> > > Ron
> > >
> > >
> *************************************************************
> > >
> > > To unsubscribe or set your subscription options, please go
> to
> > >
>
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
> > >
> > >
> > >
> >
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1