Re: [FWDLK] What is this ?

[Jim Faber <fabe7445@xxxxxxxxxxxxx>]

  A #19 drill is .166 dia.  Drill sizes are also listed alphabetically a, b etc.

  Jim Faber  300B, 70 Challenger rag top

>  -------------- Original message from David Homstad <dhomstad@xxxxxxxxxxx>: --------------
>
>
> > Ron,
> > 
> > Any Machinist's Handbook could tell you what size a # 19 drill is, but I
> > don't have one.
> > 
> > Dave Homstad
> > 56 Dodge D500
> > 
> > -----Original Message-----
> > From: Forward Look Mopar Discussion List
> > [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx]On Behalf Of Ron Waters
> > Sent: Monday, June 30, 2008 6:22 PM
> > To: L-FORWARDLOOK@xxxxxxxxxxxxx
> > Subject: [FWDLK] What is this ?
> > 
> > My 58 Plymouth shop manual refers to a #19 drill when discussing the
> > distance the carb choke should 'pull off' when the car is started. What is a
> > #19 drill, or can anyone share what the thickness of this guy is so I can
> > find a device to simulate the thickness ?
> > 
> > Thanks,
> > 
> > Ron
> > 
> > *************************************************************
> > 
> > To unsubscribe or set your subscription options, please go to
> > http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1