Careful when you go onto Karp's website - my virus software [Avira Anti-Vir - http://www.free-av.com] picked up & blocked a virus when I went on www.resleeve.com.
John Spiers
Lake Worth, Florida
--- On Tue, 7/22/08, Eastern Sierra Adjustment Svc <esierraadj@xxxxxxxxxxx> wrote:
From: Eastern Sierra Adjustment Svc <esierraadj@xxxxxxxxxxx>
Subject: Re: [FWDLK] Hissy Fitting (to be continued)
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Date: Tuesday, July 22, 2008, 4:33 PM
Karp's was the outfit recommended by Adam Lindenbaum.
Another nice guy to talk to, there.
Their quoted price, for their O/H work: $250.00 + $15.00 shipping/insurance.
They also said that they would call me, after they receive and
take-apart my booster, to advise me
on what they find to be needed to be done, and how much any additional
costs(!) might be involved.
Karp's states that they actually make the O/H kits, for 'all' the
other
shops, and that there is at least
one "very-special" part, the front-seal, which 'nobody' has
(whatever
that means).
Karp's is not, presently selling any front seals to the other-guys, and
Karp's has about 20 front seals
still in stock.
At first, Karp's said that they had a "3-week" work backlog, but,
later
in the conversation, said that there
would be only a 5-6 day turn-around. Their internet site is @ resleeve.com
I think that I'm in the wrong business.
Neil Vedder
Glenn Barratt wrote:
> Neil.
> This from Karps, relating to a bellows type system.
> Glenn.
>
> -----Original Message-----
> *From:* Jeri Karp [mailto:jerikarp@xxxxxxxxxxx]
> *Sent:* Monday, May 19, 2008 7:57 PM
> *To:* karpspb@xxxxxxxxxxxx
> *Subject:* RE: Information About Resleeve
>
>
>
> The cost to rebuild is $300.00 (US ) plus shipping and handling. We
> replace all the rubber seals, valves, polish the shafts to standard
> specs and install new rubber bellows on the outside. If the forks are
> damaged it's an additional $70.00 (US) so be sure to pack it carefully
> and insure it. You can send it by UPS, TNT or use FEDEX. I would
> recommend the postal service as the price is less and there aren't any
> duties.
>
>
>
> Regards,
>
>
>
> Ron Karp
>
> rk@xxxxxxxxxxxx <mailto:rk@xxxxxxxxxxxx>
>
>
>
> > From: karpspb@xxxxxxxxxxxx <mailto:karpspb@xxxxxxxxxxxx>
> > To: JERIKARP@xxxxxxxxxxx <mailto:JERIKARP@xxxxxxxxxxx>
> > Subject: FW: Information About Resleeve
> > Date: Mon, 19 May 2008 14:44:17 -0700
> >
> >
> >
> > -----Original Message-----
> > From: Glenn Barratt [mailto:FURY@xxxxxxxxxx]
> <mailto:%5Bmailto:FURY@xxxxxxxxxx%5D>
> > Sent: Monday, May 19, 2008 2:27 PM
> > To: karpspb@xxxxxxxxxxxx <mailto:karpspb@xxxxxxxxxxxx>
> > Subject: RE: Information About Resleeve
> >
> >
> > What do you charge for a complete rebuild and what exactly is done?
> > Thanks,
> > Glenn.
> >
> > -----Original Message-----
> > From: karpspb@xxxxxxxxxxxx <mailto:karpspb@xxxxxxxxxxxx>
> [mailto:karpspb@xxxxxxxxxxxx]
<mailto:%5Bmailto:karpspb@xxxxxxxxxxxx%5D>
> > Sent: Tuesday, May 20, 2008 1:48 AM
> > To: FURY@xxxxxxxxxx <mailto:FURY@xxxxxxxxxx>
> > Subject: RE: Information About Resleeve
> >
> > Dear Sir
> >
> > It looks like the power brake is leaking from hard seals or the
bellows
> > has cracks in it. The unit will need to be rebuilt.
> >
> > Regards Karps Power Brake 909.985.0800
> >
> > -----Original Message-----
> > From: ipw.resleeve [mailto:ipw.resleeve@xxxxxxxxxxxxxxxxxxxxx]
> <mailto:%5Bmailto:ipw.resleeve@xxxxxxxxxxxxxxxxxxxxx%5D>
> > Sent: Thursday, May 15, 2008 11:20 PM
> > To: karpspb@xxxxxxxxxxxx <mailto:karpspb@xxxxxxxxxxxx>
> > Subject: Information About Resleeve
>
>
>
> ----- Original Message ----
> From: Eastern Sierra Adjustment Svc <esierraadj@xxxxxxxxxxx>
> To: L-FORWARDLOOK@xxxxxxxxxxxxx
> Sent: Tuesday, 22 July, 2008 9:00:57 AM
> Subject: [FWDLK] Hissy Fitting (to be continued)
>
> Dave Homstad has recommended that I contact White Post Restorations, and
> so I did, today.
>
> Spoke with a nice man, there, who told me that WPR only overhauls the
> booster(s) ; no repair-parts
> sold independently, and that there is only a 24-hr turn-around, on
> their work, and that they would powder-coat my booster
> (a nice touch), and that the booster-guy would be guaranteed
> better-than-new, .....all for the low-low price of
> only $490.00 !!!!!!!!!
>
> If I had had a rubber-bellows type system, WPR would charge $695.00 for
> an overhaul.
>
> So, I guess that I'll keep on looking for a supplier of the overhaul
kit.
>
> Can any of you confuser-geniuses do an Epay scan for me, for a brake
> booster overhaul kit?
>
> Meanwhile, I'll call Kanter and Bernbaum.
>
> Neil Vedder
>
>
>
>
> John Teske wrote:
> > Neil:
> >
> > I replaced the diaphram on the bellows power brake booster for
my
> > 56 Fury. I found a NOS kit, and I believe it took me all of about
two
> > hours to do it.
> >
> > John Teske
> >
> >
> > **************
> > Get fantasy football with free live scoring. Sign up for FanHouse
> > Fantasy Football today..
> > (http://www.fanhouse.com/fantasyaffair?ncid=aolspr00050000000020)
> >
> > *************************************************************
> >
> > To unsubscribe or set your subscription options, please go to
> > http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
> <http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1>
> > <http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
> <http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1>>
> >
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
> <http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1>
*************************************************************
To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 |
Back to the Home of the Forward Look Network