Re: [FWDLK] 57-9 Power Window Conduit and Holes

[Dave Stragand <dave.stragand@xxxxxxxxxxxxxxx>]

Both pillars?  They are symmetrical -- if one is still there, it would
be the same on the other side (just reversed).

-Dave

-----Original Message-----
From: Forward Look Mopar Discussion List
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of Ron Waters
Sent: Monday, December 15, 2008 12:58 PM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: Re: [FWDLK] 57-9 Power Window Conduit and Holes

Dave -

Problem is, I replaced the metal on the pillar years ago. So no dimple.
:(

I did find the dimple on the door, which will be drilled out with a hole
saw
as soon as I can determine the correct hole size.

Ron

----- Original Message ----- 
From: "Dave Stragand" <dave.stragand@xxxxxxxxxxxxxxx>
To: "Ron Waters" <ronbo97@xxxxxxxxxxx>; <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Monday, December 15, 2008 11:39 AM
Subject: RE: [FWDLK] 57-9 Power Window Conduit and Holes


There is actually already a dimple in the metal on the pillar and door
for drilling.  I believe the diameter is 1", but not certain.

-Dave

-----Original Message-----
From: Forward Look Mopar Discussion List
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of Ron Waters
Sent: Sunday, December 14, 2008 5:20 PM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] 57-9 Power Window Conduit and Holes

Hi Everyone -

Can someone send me a clear picture of the locations of the power window
conduit holes on both the front door and the A-post ? This would be the
same
for all 57-9 Dodge, Desoto and Chrysler. Also, what should the diameter
of
those holes be ?

Thanks,

Ron

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1